Firebirdss

Hope someone helps me out with this.

Yea mine is plugged into a power strip but I'm pretty sure its all plugged in. I just checked and its all plugged in real good this strip also serves as a surge protector strip and my PC's power cable cannot reach the outlet that is nearby. By I will note that and keep a close Eye on it if anything ill just uses a different one.

I should be more specific buy them from cable mod if you want a specific color or want them all to be sleeved or what not. Like The Cheeto Bomb says to get them off eBay or Amazon if you just need one specific one.

Cablemod

See I Have checked all of that and done a lot of CMOS resets too. I tried to upgrade bios to the latest version but I can't since it's in an unreadable format I did get it from manufactures website so Idk.

My computer has a hard time getting to even post when I turn it on. 2 months ago I got a new gpu and it started a week after that my power supply can handle the power draw cause my old gpu and new one use 100w of power. When the pc is turned off or crashed like it did while making this post. It won't post unless I use the reset switch and psu power off switch a million times and unplug and plug in the gpu many times. If the pc doesn't have a gpu it won't post either or it will and then I will proceed to plug the gpu in and it may post with it plugged in or not. I do this many times and finally it will post but it will inevitably need to be turned off since if "I put it into sleep it needs to be reset in order to come back on" because I don't pay for power. Specs are. A6-3650k overclocked to 3.2 Ghz I could push higher and if left at Stock issue persist. Corsair CMX4GX3M1A16000C9 2X4GB Corsair CMX3X2G1333C9 1X2GB doesn't t matter how ram is setup issue persist. Corsair VS 400 PSU R7-360 xfx edition single blower MSI A75MA-G55 mainboard I hope someone will help me out last post I did, got left.

I hope my post makes sense I could care less about dealing with the computer going through post. I just don't want it to freeze at random times like it does.

Yes I did. I don't quite understand the problem was worse when I was up to 10GB of ram but now im at 8.

So about half a month ago my computer started to have a weird issue in which the computer come 6-8 am will freeze and I half to do a hard reset. And during games, it lags so bad that the computer will sometimes reset entirely. During startup is the worst because I half to keep turning the computer on and off and sometimes half to remove the GPU just for the computer to post after it has post then I reseat the GPU plug it in and then everything runs normally. Do note I went from an HD 6770 to an R7 360. I am also overclocking my A6-3650 from 2.6 to 3.2 using the multiplier.

And another question I have is it better to oc by changing multi or fsb?

Oh boy ok so then how do I combat this issue.

So what about the at 100% load does that mean that that number is also wrong.

That is another thing I really don't know how hot the system is running due to the fact that the bios reports 44°c in bios but on AIDA-64 and speedfan it drops to as low as 12°c and on 100% load it spikes up to only 50°c. So Idk whats going on with this PC really. Everything but the power supply and case are used.

So like AIDA-64?

So I have an A6-3650 overclocked to 3.4 GHZ but my problem is in any intensive application the CPU isn't used over 81%. Is it because I overclocked by changing the cpu multi and it wont go any higher cause of that? I am also mining for z-cash with just the CPU so that's why I ask.