Jump to content

xHadrian

Member
 View Profile  See their activity

  • Posts

    362

  • Joined

  • Last visited

 Content Type 

Everything posted by xHadrian

  1. xHadrian
    Same thing happened to me with the same block (Supremacy EVO) - been using it for 2 years now (with slight cracks/scratches) and no issues. Think it’s purely on the surface.
  2. xHadrian
    Thanks for the help, I was concerned as I remember before going hard-line that my core and package temps were the same.
  3. xHadrian
    Hey, so about a month ago I finished my first hard-line loop. However, I've noticed that there is around a 10~ degree difference between my package and core temps. I didn't really think much about it, since it was a new loop, but now 1 and a half months later it's starting to bother me. Any help would be appreciated. Specs: i7 5820k @stock GTX 980 Ti @stock 240 rad 360 rad Thermaltake Riing Fans H440
  4. xHadrian
    Use this with an AIO: https://www.nzxt.com/products/kraken-g12-white
  5. xHadrian
    Update: New board (MSI X99A Gaming Carbon) just arrived. I bought a Hyper 212 Evo as well, to be able to test my PC on air. Drained loop, connected everything to new board and plugged in the card (with its air-cooler) to the new board, and everything works! Played around in windows for around 10 minutes, and run a Cinebench OpenGL test, and everything's good.. Turns out old board was defective. I cannot express how happy I currently am, as this project has been going on for around a month now and has drained me a lot. I'll post a final update once I get everything on water.
  6. xHadrian
    I'd recommend you get a Cooler Master AIO: http://www.coolermaster.com/amd-tr4-ryzen-threadripper-compatability/en/
  7. xHadrian
    I believe SingularityComputers did it once, however the reservoir was custom-made by a company and he just polished it:
  8. xHadrian
    Hey, so I was wondering if I could apply AS5 on my GPU? I know that it is non-conductive, however it is capacitive. Would that cause problems, since the GPU doesn't have a heatspreader? Thanks.
  9. xHadrian
    This block was specially designed for the new Threadripper socket, and is for use in custom loops.
  10. xHadrian
    Cases from CaseLabs, Fractal Design. They're usually optimized really well for watercooling.
  11. xHadrian
    Yeah, might be able.
  12. xHadrian
    Nope, they're not noisy at all, however I'd need the controllers to control the RGB.
  13. xHadrian
    So I'm playing to get the MSI X99A Gaming Pro Carbon, however it has only one PWM fan header. So I'm currently running a custom loop, with 6 first generation Thermaltake Riing Fans, which come each with a 3 fan controller. It's controlled by physical switches on the hub. So my question is, is it possible for me to run my pump off of the PWM header and the fan controllers over voltage, and then controlling the speed using the buttons on the hub? Thanks.
  14. xHadrian
    Hey, so recently the PCIE slots on my Rampage V Extreme stopped working, so now I have to buy a new board. I was looking at the ASUS ROG Strix X99, but I've read a lot of reviews about it that it fries CPUs. What is the best X99 board do you guys think? My color scheme is black/red, but RGB would work too. Thanks.
  15. xHadrian
    Update: Drained loop, stuck card in the second slot and worked fine, booted. Refilled system, all works well. After a few seconds, it just would give no output, however the system was still on. Basically the same problem. I'm pretty positive that it's a motherboard issue now, since the same exact thing happened to two cards that worked fine before. What do you guys think? Should I just go ahead and purchase a new motherboard? Note that both of these cards used to work before.
  16. xHadrian
    Not too sure, but I'm pretty positive it should work.
  17. xHadrian
    I'm pretty sure that would be possible, I think I've seen that done before with an H440. Just make sure that your reservoir is secure and you shouldnt have any troubles.
  18. xHadrian
    My old loop in the H440 used to have the reservoir mounted horizontally on the PSU shroud. It currently looks like this, modded:
  19. xHadrian
    EK have announced that they will have individual aluminum parts be released later this year. I guess you're better off with the S240, since there are just so much more options in terms of expandibility.
  20. xHadrian
    I'm not sure what material that logo is, but I'd guess that the Rustoleum Universal paint should work, as it's a paint + primer that works on just about everything. Plastidip would be a good choice if it was plastic.
  21. xHadrian
    Yeah, but restarting your system would be better than pulling out the cards each time.
  22. xHadrian
    Also, on my motherboard theres an option where you can disable certain PCIE slots with a physical button. I guess you could do that if your board had that, disabling the slots without needing to take the cards out.
  23. xHadrian
    Yes, but that doesn't imply he wants to run them in SLI. His question is would they work if he plugged both of the same in the same motherboard, each running seperately.
  24. xHadrian
    He's asking if he can run them, and not if they'd work together. Honestly I have no idea.
  25. xHadrian
    The Hyperx Cloud II is an excellent option at 99 USD. However, the Cloud Core is basically a basic version of it at 65 USD. Both options are excellent, as I have the Core right now and it's super comfortable.
×