Nena Trinity

Mine had weird issues after a BIOS update, I had 4 sticks built up by 2 kits and for some reason post update dimm 1 & 2 gotta have slowest kit and 3 & 4 gotta have the faster kit. Before they were set like it SHOULD BE! I suspect it could be the BIOS version?

I think all you need for gaming is a 5600X or 12100F so you should be good to go on a low budget, 16 to 32GB RAM depending on the games you play & finally mobo I would go for something with PCI GEN 4.0 just incase ou get a better GPU down the line.

Might be able to, just gotta try! The best chance if all 4 sticks has same memory and PCB layout. (sadly not easy to check before you plug em in to look in CPU-Z and layout is even harder unless you know what to look for)

I see no major red flags anywhere, tough in these shoes I would keep the i7 tough if you are 100% sure it is part of the problem then go for it!

I suspect driver related tough it could be PSU struggling?

EZ max CPU speed and pick the fastest Radeon that can play the game at desired frames. My bet is cheapest 7000 series 3D chip + Radeon 7600 XT or something would do?

What RAM speed is that RAM? 3200MHz or better I would suggest keeping the CPU, MOBO & RAM and just fix everything that is not working. For GPU anything that is on par or better than RX 6700 should be good enough!

5800X3D + GPU upgrade would probably do the trick. Edit: Some weird games really like 32GBs of RAM but doubt it is a concern.

You should be able to play every game the Playstation 5 can, now if you expect 60 FPS in all games that may not be feasable. 144fps even less so but I guarantee that it should be able to PLAY EVERYTHING!

UPDATE: I have taken 2 sticks of memory out, then enabled XMP, and now my system runs properly. But of course now the problem is that I'd like to utilize all of the RAM i bought and have it work with XMP. THIS There are a few things you need to keep in mind, 1 what type of memory layout does your board have? Daisy chain? Or T-Topology? I have a board that refuses to run XMP speeds above 2933MHz on 2 of the DIMM slots, why? BECAUSE ONE OF THE TWO TYPES MENTIONED ABOVE ONLY 2 OF THE DIMM SLOTS ARE THE FAST LANE! 2 can your CPU even handle 4 sticks at that speed? Well look at what the manufacturer promises and see how far above you go? More DIMMs = more stress on the CPU, more memory ranks is same problem so buying 2 sticks of double capacity might get you nowhere!

Like I said unless you MOST have 144FPS+ it is fine.

Honestly a 3600 is good enough for this whole gaming generation, probably until Playstation 6 comes. Unless you want 144fps in EVERYTHING that is?

It is more of a reliability check up for the PSU not to familiar with that specific model, would be a shame if the 4090 had a meltdown due to PSU getting overloaded or something...

Best GPU around until 5000 series launch, not sure how good the software you use support AMD GPUs but those are potentially a option? Anyhow looks solid tough I would look up a tier list for the PSU just in case.

Need help!

This stupid thing decided to shit itself so the problem is somethign called a network controlller and bluetooth is missing and despite re-installing the WIFI driver it is still being stupid and refuses to interwebs! What the H is a Network Controller and why is it needed for wifi plus where can I get a driver for it?!!

Is it worth buying now or are the drivers still a dumpster fire?

m.2

+ System - Provider [ Name] Microsoft-Windows-DistributedCOM [ Guid] {1B562E86-B7AA-4131-BADC-B6F3A001407E} [ EventSourceName] DCOM - EventID 10016 [ Qualifiers] 0 Version 0 Level 3 Task 0 Opcode 0 Keywords 0x8080000000000000 - TimeCreated [ SystemTime] 2022-09-13T07:00:51.4606339Z EventRecordID 87146 - Correlation [ ActivityID] {5d9ee24a-8818-49dc-ade2-6f6e31b60b43} - Execution [ ProcessID] 1236 [ ThreadID] 15616 Channel System Computer Super-7 - Security [ UserID] S-1-5-21-799096635-942314902-2647470108-1001 - EventData param1 application-specific param2 Local param3 Activation param4 {37399C92-DC3F-4B55-AE5B-811EE82398AD} param5 {37399C92-DC3F-4B55-AE5B-811EE82398AD} param6 SUPER-7 param7 kenne param8 S-1-5-21-799096635-942314902-2647470108-1001 param9 LocalHost (Using LRPC) param10 Microsoft.GamingApp_2209.1001.4.0_x64__8wekyb3d8bbwe param11 S-1-15-2-1723189366-2159580849-2248400763-1481059666-1951766778-2756563051-3565589001

Innstillingene for application-specific-tillatelse gir ikke Local Activation-tillatelse til COM Server-programmet med CLSID {37399C92-DC3F-4B55-AE5B-811EE82398AD} og APPID {37399C92-DC3F-4B55-AE5B-811EE82398AD} til brukeren SUPER-7\kenne SID (S-1-5-21-799096635-942314902-2647470108-1001) fra adressen LocalHost (Using LRPC) som kjører i programbeholderen Microsoft.GamingApp_2209.1001.4.0_x64__8wekyb3d8bbwe SID (S-1-15-2-1723189366-2159580849-2248400763-1481059666-1951766778-2756563051-3565589001). Denne sikkerhetstillatelsen kan endres med det administrative verktøyet Komponenttjenester.

Microsoft Windows [Version 10.0.19044.1889] (c) Microsoft Corporation. Med enerett. C:\WINDOWS\system32>list partition 'list' is not recognized as an internal or external command, operable program or batch file. C:\WINDOWS\system32>diskpart Microsoft DiskPart version 10.0.19041.964 Copyright (C) Microsoft Corporation. On computer: SUPER-7 DISKPART> list partition There is no disk selected to list partitions. Select a disk and try again. DISKPART> list drive Microsoft DiskPart version 10.0.19041.964 DISK - Display a list of disks. For example, LIST DISK. PARTITION - Display a list of partitions on the selected disk. For example, LIST PARTITION. VOLUME - Display a list of volumes. For example, LIST VOLUME. VDISK - Displays a list of virtual disks. DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 F WD Unlocker UDF CD-ROM 30 MB Healthy Volume 1 C NTFS Partition 465 GB Healthy Boot Volume 2 NTFS Partition 518 MB Healthy Hidden Volume 3 E Samsung 850 NTFS Partition 465 GB Healthy Volume 4 FAT32 Partition 512 MB Healthy System Volume 5 X Kingston M. NTFS Partition 931 GB Healthy Volume 6 D My Passport NTFS Partition 1862 GB Healthy Volume 7 G PC DRIVE II FAT32 Removable 7680 MB Healthy Volume 8 H PC DRIVE I FAT32 Removable 7633 MB Healthy DISKPART> select volume 5 Volume 5 is the selected volume. DISKPART> attributes volume clear readonly DiskPart has encountered an error: Datafeil (sirkulerende overflødighetskontroll, CRC). See the System Event Log for more information.

So without the only option is file storage?

Hi I need a tool to make multiple files into a playable disc for a blue-ray player/pc anything with a blue-ray disc drive. (25GB discs) My last attempt with IMGburn only moved the files to the disc and that did not work, at the very least not on my PS5...

If a problem is present is it better to tightening more or try to reduce the pressure first?

I am not getting any signal on the PCI-E it's either my GPU or the cooler was to tight, any way to know if the board is broken? Like the pins.