Lavin

Hello everyone!
 
I'm a huge fan of Linus and watch a lot of his videos. I wanted to post my recent build in here to showcase the new Phanteks Enthoo Primo. I've been looking for a case that suited my needs and while I thought the 900D was gorgeous, it was simply too large for my tastes. Given that, the Enthoo is slightly smaller, it has so many features that cater to water cooling enthusiasts and it shows. I absolutely love this case and I see myself using it exclusively for years to come.
 
I am also a custom sleever and I've been selling custom sleeve jobs on reddit. You can view my work here. Now that I've said this, I was not happy with the way the 24-pin turned out on this current build. I sleeved the stock cable and it was an absolute nightmare. I will most likely never sleeve another stock PSU. It's significantly faster for me to cut and crimp my own wires, than to de-pin a stock cable. I will do another 24-Pin custom cable on the next iteration of this build.
 
Components List:
CPU:  Intel Core i7-3820 3.6GHz Quad-Core Processor  
Motherboard:  Gigabyte GA-X79-UP4 ATX LGA2011 Motherboard  
Memory:  Corsair Dominator Platinum 8GB (2 x 4GB) DDR3-1600 Memory   
Memory:  Corsair Dominator Platinum 8GB (2 x 4GB) DDR3-1600 Memory  
Storage:  Samsung 840 Series 250GB 2.5" Solid State Disk
Storage:  Seagate SV35.5 3TB 3.5" 7200RPM Internal Hard Drive  
Video Card:  MSI Radeon HD 7970 3GB Video Card
Video Card:  MSI Radeon HD 7970 3GB Video Card
Sound Card:  Asus Xonar DX 24-bit 192 KHz Sound Card
Case:  Phanteks Enthoo Series Primo Aluminum ATX Full Tower Case
Power Supply:  SeaSonic Platinum 1000W 80 PLUS Platinum Certified ATX12V / EPS12V Power Supply  
 
 
Water Cooling Parts List:
Radiators: EK-CoolStream RAD XTX (240), EK-CoolStream RAD XT (480)
Fans: Scythe Gentle Typhoon AP-14 (Bottom Radiator) AP-45 (Top Radiator)
Blocks: EK-Supremacy - Acetal + Nickel, EK-FC7970 - Acetal + Nickel CSQ x2 - EK-FC7970 Backplate - Black CSQ
Pump: Swiftech MCP35X PWM
Reservoir: EK-MultiOption RES X3 250
Coolant: Mayhems Pastel Coolant Concentrate - 250mL - Ice White
Tubing: Tygon E-1000 3/8" ID (5/8" OD)
Fittings: (3/8" x 5/8") - EK G1/4 Compression Fitting, Bitspower Compression Fitting
Adapters: Swiftech Lok-Seal™ 45° Swivel Elbow Adapter, EK CSQ G1/4 Thread 90° Fitting Adapter, Bitspower G1/4 Male to Female Extender - 25mm
Misc: EK-VGA I/O bracket HD7970, EK-FC Bridge TRIPLE Parallel CSQ, EK-FC Link BLANK Parallel CSQ, M3-0.5 x 30mm Socket Head Screws
 
 
 
And now, off to the pictures!









Time to install some tubing!
 


So uh... that escalated quickly. I was so sure I had more pictures of me tubing it up but... oh well.
 
So finally, some day light pictures!
 

 





















If you guys have any comments or questions, please let me know!

Finished product. Came back from QuakeCon 2015  yesterday. This rig was posted up in Corsair's BYOC booth! 

Finished product. Came back from QuakeCon 2015  yesterday. This rig was posted up in Corsair's BYOC booth! 

Finished product. Came back from QuakeCon 2015  yesterday. This rig was posted up in Corsair's BYOC booth! 

Finished product. Came back from QuakeCon 2015  yesterday. This rig was posted up in Corsair's BYOC booth! 

Finished product. Came back from QuakeCon 2015  yesterday. This rig was posted up in Corsair's BYOC booth! 

PCI-E Cables Finished! 8+6 Pin with 14-Pin Octacombs!


PCI-E cables installed.


All six(6) cables done!!! 

H75 Rings painted gloss white!

HG10 Bracket terribly painted.

H110i retention bracket painted Krylon Gloss White!


 

PCI-E Cables Finished! 8+6 Pin with 14-Pin Octacombs!


PCI-E cables installed.


All six(6) cables done!!! 

H75 Rings painted gloss white!

HG10 Bracket terribly painted.

H110i retention bracket painted Krylon Gloss White!


 

Finally got them all in!

 
Motherboard and CPU cooler combo.

 
Beautiful case!


 
Disassembly for cabling.

 
Ripped out the worthless fan cables as I won't be using them.

 
Going to be using this sweet Corsair Link!

 
The money shot! 


 

Upclose look of the Corsair HG10 N780!




Showin' the motherboard installed.

Shortened the 140mm AF140 fan for the rear. I did this to get a fully custom length.

Got the 8-Pin EPS Motherboard extension cable built.

Showing off Corsairs' latest and greatest, the RMi series!


The 8-Pin EPS bare wire cable.

Finally, the 24-Pin Motherboard extension cable.

Both cables installed.

Three video cards installed for fitment checks.

 
I'll have more soon! I just finished up all the GPU cables and need to take a break. I actually have to go in to work today... even though I stayed up all night to finished all these cables. I'll catch up with you guys soon!

Upclose look of the Corsair HG10 N780!




Showin' the motherboard installed.

Shortened the 140mm AF140 fan for the rear. I did this to get a fully custom length.

Got the 8-Pin EPS Motherboard extension cable built.

Showing off Corsairs' latest and greatest, the RMi series!


The 8-Pin EPS bare wire cable.

Finally, the 24-Pin Motherboard extension cable.

Both cables installed.

Three video cards installed for fitment checks.

 
I'll have more soon! I just finished up all the GPU cables and need to take a break. I actually have to go in to work today... even though I stayed up all night to finished all these cables. I'll catch up with you guys soon!

Upclose look of the Corsair HG10 N780!




Showin' the motherboard installed.

Shortened the 140mm AF140 fan for the rear. I did this to get a fully custom length.

Got the 8-Pin EPS Motherboard extension cable built.

Showing off Corsairs' latest and greatest, the RMi series!


The 8-Pin EPS bare wire cable.

Finally, the 24-Pin Motherboard extension cable.

Both cables installed.

Three video cards installed for fitment checks.

 
I'll have more soon! I just finished up all the GPU cables and need to take a break. I actually have to go in to work today... even though I stayed up all night to finished all these cables. I'll catch up with you guys soon!

Finally got them all in!

 
Motherboard and CPU cooler combo.

 
Beautiful case!


 
Disassembly for cabling.

 
Ripped out the worthless fan cables as I won't be using them.

 
Going to be using this sweet Corsair Link!

 
The money shot! 


 

Finally got them all in!

 
Motherboard and CPU cooler combo.

 
Beautiful case!


 
Disassembly for cabling.

 
Ripped out the worthless fan cables as I won't be using them.

 
Going to be using this sweet Corsair Link!

 
The money shot! 


 

Okay, so I got the images uploaded for now. For this post, I got these parts a few days ago.
 
Here's the Corsair Link.

 
SP120, AF140 and H75 unit. 

 
Brand new RM1000i  and super excited to use it!

 
The 3x HG10s.

 
And the super awesome picture of 3x 780s.

 

Finally got them all in!

 
Motherboard and CPU cooler combo.

 
Beautiful case!


 
Disassembly for cabling.

 
Ripped out the worthless fan cables as I won't be using them.

 
Going to be using this sweet Corsair Link!

 
The money shot! 


 

Finally got them all in!

 
Motherboard and CPU cooler combo.

 
Beautiful case!


 
Disassembly for cabling.

 
Ripped out the worthless fan cables as I won't be using them.

 
Going to be using this sweet Corsair Link!

 
The money shot! 


 

I love that backplate design. Can't wait to see the final version!

It's something like 6mm M3 bolt you can find in Home Depot. Really easy and they come in 3 pack so, so buy two packages.
 

Haha, thanks guys! I take pride in my work and make sure that I get all the small details. I definitely build it how I would want it so I can provide my customers with the highest level of quality.

Hello everyone! I got another client build here and this one was one of my absolute favorite. The nCase is a fantastic case and I hold it in the highest regards. It is simply one of the best cases ever produced. With that said, here is the parts list!   CPU: Intel Core i5-4690K CPU Cooler: Corsair H75  Motherboard: Asus Z97I-PLUS  Memory: Corsair Vengeance 8GB (2 x 4GB) DDR3-1600  Storage: Samsung 850 EVO-Series 250GB Video Card: EVGA GeForce GTX 980  Case: nCase M1 - Silver ($220.00) Power Supply: Silverstone SX600-G Case Fan: Scythe Gentle Typhoon 28.2 CFM 120mm  Fan Case Fan: Scythe Gentle Typhoon 28.2 CFM 120mm  Fan Case Fan: Scythe Gentle Typhoon 28.2 CFM 120mm  Fan   And finally, here are the pictures!
 















 

Hm, we can talk. Hit me up at lavins@hexagonpc.com

That's the beauty of them, you can attach any sleeved extension you want onto them! 
Alternatively, I also produce normal unsleeved wires that are the exact length you need. Give me some measurements and I will build it for you. Any length at all! That way, you don't have any excess slack that will dirty up your case and build up clutter.

Canon T2i with a Bower 35mm Cinelens.

Hello everyone! I got another client build here and this one was one of my absolute favorite. The nCase is a fantastic case and I hold it in the highest regards. It is simply one of the best cases ever produced. With that said, here is the parts list!   CPU: Intel Core i5-4690K CPU Cooler: Corsair H75  Motherboard: Asus Z97I-PLUS  Memory: Corsair Vengeance 8GB (2 x 4GB) DDR3-1600  Storage: Samsung 850 EVO-Series 250GB Video Card: EVGA GeForce GTX 980  Case: nCase M1 - Silver ($220.00) Power Supply: Silverstone SX600-G Case Fan: Scythe Gentle Typhoon 28.2 CFM 120mm  Fan Case Fan: Scythe Gentle Typhoon 28.2 CFM 120mm  Fan Case Fan: Scythe Gentle Typhoon 28.2 CFM 120mm  Fan   And finally, here are the pictures!