-
Posts
46 -
Joined
-
Last visited
Reputation Activity
-
L3p got a reaction from Captain Matt in Project Razer
Feeling a bit weird about this :unsure:
Even the loop from L3p D3sk looks the same combined with Raz3r D3sk
-
L3p got a reaction from TheCamba in [Casemod] Tt D3sk - Finished!!
I want to thank every one for the awesome support!
What a great day! Oh man!
Click below to check my new website too
-
L3p got a reaction from mikeeginger in [Casemod] Tt D3sk - Finished!!
Lets kick off with the first big update
Unpacking .. Awesome!
The P5's
480 Rads
Plenty of pump power.
Reservoirs
Lots of fans.
Cpu and Strix blocks
Not sure yet if and how much I will use it, but a bending kit
It will be a mixture of PETG and nickelplated brass
All unpacked
So shiny!
The gaming gear! Off course needed to complete a desk.
First steps, mounting the fans.
And sleeving the pumps.
Just trying to imagine myself how it would look.
Sawing mounting rails for the desk
Will be using regular shelve holders to mount the desk to the wall
The idea
More next time
-
L3p reacted to TheCamba in [Casemod] Tt D3sk - Finished!!
I agree. White is very becoming of that setup.
-
L3p got a reaction from paddy-stone in [Casemod] Tt D3sk - Finished!!
Finally the last fittings also arrived.
So I could finish the last part of the loop.
And testing if everything still works ..
Time to fill it up
Always exciting
Not a single leak
Next thing is also very exciting ... is the hardware still working?
Awesome when you see on first boot "CPU Fan speed error detected"
That's good
And so the glass panel goes up
Chair also fits perfectly
One last small update and then ... final pics!
-
L3p got a reaction from MadG4mer in [Casemod] Tt D3sk - Finished!!
By 8 pieces of slip free rubber on the poles
-
L3p got a reaction from paddy-stone in [Casemod] Tt D3sk - Finished!!
Small extra before the final post.
Found some plexi from a previous project which will come to good use
Sawing, sanding and polishing.
And done
-
-
L3p got a reaction from paddy-stone in [Casemod] Tt D3sk - Finished!!
I want to thank everyone for following this project!
For me personally it was quite a challenge.
First of all because of the available free time I had next to my job and family.
But specially to create a 'Desk PC' below $400 of material. (2xP5 + tools + glass + mounting)
All this with standard tools like a jigsaw, drill, ironsaw, file and sandpaper.
So here's my contribution to the Thermaltake CaseMOD Invitational 2016 Season 1
Finally I had 20 minutes to enjoy DOOM
I tested all possible color combinations, my personal choice was Blue/Red, however I think many will like white too.
ps. Should I make a little video too?
-
L3p got a reaction from TheCamba in [Casemod] Tt D3sk - Finished!!
I want to thank everyone for following this project!
For me personally it was quite a challenge.
First of all because of the available free time I had next to my job and family.
But specially to create a 'Desk PC' below $400 of material. (2xP5 + tools + glass + mounting)
All this with standard tools like a jigsaw, drill, ironsaw, file and sandpaper.
So here's my contribution to the Thermaltake CaseMOD Invitational 2016 Season 1
Finally I had 20 minutes to enjoy DOOM
I tested all possible color combinations, my personal choice was Blue/Red, however I think many will like white too.
ps. Should I make a little video too?
-
-
L3p got a reaction from F.A.T. in [Casemod] Tt D3sk - Finished!!
I want to thank everyone for following this project!
For me personally it was quite a challenge.
First of all because of the available free time I had next to my job and family.
But specially to create a 'Desk PC' below $400 of material. (2xP5 + tools + glass + mounting)
All this with standard tools like a jigsaw, drill, ironsaw, file and sandpaper.
So here's my contribution to the Thermaltake CaseMOD Invitational 2016 Season 1
Finally I had 20 minutes to enjoy DOOM
I tested all possible color combinations, my personal choice was Blue/Red, however I think many will like white too.
ps. Should I make a little video too?
-
L3p reacted to F.A.T. in [Casemod] Tt D3sk - Finished!!
Good to find you here also !! Absolutely beautiful Peter! and....YES PLEASE a video !!!
-
L3p got a reaction from Anthony_95 in [Casemod] Tt D3sk - Finished!!
And another update!
Almost used all the fittings.
But glad some extra are on the way.
So first some more cable management.
So also the Displayport, keyboard and mouse cable.
Done!
Checking if everything still works.
Also received a flowmeter to check out.
Funny mirroring seen from bottom.
I guess white isn't too bad either.
-
L3p got a reaction from paddy-stone in [Casemod] Tt D3sk - Finished!!
And another update!
Almost used all the fittings.
But glad some extra are on the way.
So first some more cable management.
So also the Displayport, keyboard and mouse cable.
Done!
Checking if everything still works.
Also received a flowmeter to check out.
Funny mirroring seen from bottom.
I guess white isn't too bad either.
-
L3p got a reaction from paddy-stone in [Casemod] Tt D3sk - Finished!!
Time to mount the blocks!
I always love these
2 hours later.
I'm working with several controllers for fans and lighting and want to have them in groups.
Fans - Top lighting - Bottom lighting
Need multiple cables and extensions from side to side through the 'powerbar'
Like this
Also want some cable managements, all extra cable out of sight in the P5
Done!
-
L3p reacted to EX1 in [Casemod] Tt D3sk - Finished!!
Never thought about using the P5 chassis as a desk! Awesome work Peter!
-
L3p got a reaction from Anthony_95 in [Casemod] Tt D3sk - Finished!!
The loop. Finally!
First some pads underneath the GPU's
And the first fittings and pipe
Works like a charm
Should become something like this.
But still lots to do.
-
L3p reacted to nmil in [Casemod] Tt D3sk - Finished!!
So many pretty things I will never be able to afford. Mod looks good though, I love the floating look.
-
L3p got a reaction from paddy-stone in [Casemod] Tt D3sk - Finished!!
More drilling, cutting, filing and sanding.
Came up with an little idea to bring 12V for fans, pump and lighting to the right side of the desk.
Picked up the laminated glas panel for the Tt d3sk.
Also picked up something awesome to complete this desk setup
Back to the 'powerbar'
2 molex lines directly from PSU to the right side.
Some wire management inside the P5
Test
Shortening the massive steel poles which will hold the glass panel.
I just found out where my safety glasses were
Few to go.
Going to test the hardware without liquidcooling. Very excited!
I never thought about the ROG logo from the Asus PG348 ... normally it shines ON your desk ...
I like the effect
-
L3p got a reaction from Anthony_95 in [Casemod] Tt D3sk - Finished!!
More drilling, cutting, filing and sanding.
Came up with an little idea to bring 12V for fans, pump and lighting to the right side of the desk.
Picked up the laminated glas panel for the Tt d3sk.
Also picked up something awesome to complete this desk setup
Back to the 'powerbar'
2 molex lines directly from PSU to the right side.
Some wire management inside the P5
Test
Shortening the massive steel poles which will hold the glass panel.
I just found out where my safety glasses were
Few to go.
Going to test the hardware without liquidcooling. Very excited!
I never thought about the ROG logo from the Asus PG348 ... normally it shines ON your desk ...
I like the effect
-
L3p got a reaction from paddy-stone in [Casemod] Tt D3sk - Finished!!
I planned the whole weekend for measuring, cutting, drilling, filing, sanding etc
Ahh yes .. what I've been waiting for!
One arm should be able to hold 63kg, I'm using 4 of them.
Not much left of the internals.
Bottom shot.
So lets cut! (tried the dremel once again .. screw that)
Cover plate for right side of the desk where normally the mainboard goes
More filing needed
And holes
Also countersinking the PSU
Sorry, I don't like stickers
Rads also more inside
More holes, drilling and sanding.
Just had to test the fans
-
L3p got a reaction from paddy-stone in [Casemod] Tt D3sk - Finished!!
Today the hardware and modcave
Best looking mainboard ever.
The power.
Avexir memory
Lovely ssd.
GPU power.
More power
Some shots together.
Cleaned up the modcave where it's all going to happen.
-
L3p got a reaction from AddonCustoms in Project: L3peau
And here's the final shoot
Another awesome experience in France together with the LDLC crew and my co-modders!
And ... I'm very honored to reach second place in the contest
Thanks for following!
-
L3p reacted to 8uhbbhu8 in Project: L3peau
Holy Damn Shit!!!! This is possibly the best iv'e seen in a very long time! love the accents with the tubing integrated into the case!