Jumper118

2990WX

i3 12100F BCLK

i7 7820X

i7 3770K

1 hour ago, iHardware Shelden said:

I'm so happy to see this thread still active!

well not really. its pretty dead  shame but meh

21 hours ago, Anthony_Baksteen said:

With Lower Temps ?

 

Mine runs up to 84 when play games and idles at 36 

if you use the curve optimiser you can lower the volateg and get higher clock speeds. 

R23 single

On 11/9/2021 at 2:12 PM, flibberdipper said:

I sidegraded to a 4820K, apparently. It's nice being able to finally have something as fast as a Haswell i7 even though I draw like 2-3x the power. Only change since this run is I dropped down to 4.5GHz/1.25v with a load voltage of 1.24 because the power succ was depressing. Only dropped down to an 820 which is fine by me.

 

 

X79 still great platform, cpus extemely cheap now too 

21 hours ago, Anthony_Baksteen said:

My Score on a 5900x everything Stock, I did however Enable XMP Profile 1 for Proper ram speeds.

 

I don't know if this is good or bad?

 

not amazing but looks about right for stock. depending on your cpu and cooler, the pbo and curve optimiser should get at least 10% more out of it. 

On 11/9/2021 at 7:17 PM, Mister Woof said:

single core next!

wish granted but only R23

Over 30K in R23, still slower than 5950X

ok then i'll do it

no 12th gen yet? 

its almost 1 whole year since i updated the sheets. how exciting. 

On 7/29/2021 at 4:59 PM, Luggage said:

Well OP wrote "Don't Crop!" ...



 

yes, dont crop, cropping is bad. i have a 4k monitor so i can see everything fine  

On 1/29/2021 at 8:17 PM, agent_x007 said:

@DildorTheDecent @Jumper118@iHardware Shelden
Been away for awhile, but I found myself new platform to test

Cooling : Eisbaer AIO (modified : 360x45mm + 3x Delta fan)

FX-8150 @ 4,94GHz + 16GB @ 2079MHz CL9 1,67V (4x4GB) + Crosshair V Fomula (1703 w/NVMe mod)


FX-8150 @ 4,94GHz + 16GB @ 2079MHz CL9 1,67V (4x4GB) + Crosshair V Fomula (1703 w/NVMe mod)


FX-8150 @ 4,94GHz + 16GB @ 2079MHz CL9 1,67V (4x4GB) + Crosshair V Fomula (1703 w/NVMe mod)


FX-8150 @ 4,94GHz + 16GB @ 2079MHz CL9 1,67V (4x4GB) + Crosshair V Fomula (1703 w/NVMe mod)

^Side note : 420W from the wall (I'm using Corsair AX860)

FX was a good chip for overlocking, but not much else. great fun. 

20 hours ago, Babylon said:

Well, It bummed out at 4550 MHz, But it's running at 4525 OK.

 

4.5ghz is really good for a 3600. 

On 11/13/2020 at 1:26 PM, Pasi123 said:

Cinebench R23 results from few PCs:

 

Xeon X5670 @ 4.4GHz (5464 pts)

 

 

 

i7-4800MQ @ stock (3288 pts)

 

 

 

Xeon X5677 @ stock (2996 pts)

 

 

 

i5-3450 @ 3.9GHz 1-2 cores, 3.8GHz 3 cores and 3.7GHz all 4 cores (2924 pts)

 

x58 still going strong  

3 hours ago, Dabombinable said:

This is actually a Sempron 2800+, the motherboard BIOS is just seems to have issues recognising anything not labelled Athlon or Duron. Can't find a BIOS update for it either:


I need to do the unlock mod - using the Athlon XP as reference:

 

  Reveal hidden contents

 

good to see you used both  

5 hours ago, ShrimpBrime said:

There will be improvements on all the boards. Just have to wait it out (like normal).

Bummer your phase change died. Bet these chips do ln2 6ghz  

Yeah I will revisit it once the fclk oc is more stable. I have competitions to focus on for now. 

Yeah that's the 2nd phase cooler I've had that's died now. Luckily they both were very old and used a lot. I would like to get Ln2, but tis always evaporating money into air, which I don't really want to do. I normally only use Ln2 on special events or team meet ups. The phase keeps me going between them. 

4 minutes ago, ShrimpBrime said:

Think the 1.1.0.0 is no good then?

idk if its a geezers fault or asus. MSI boards seem to be doing much better. I'm even going to go back to the old bios that was stuck at 1900 fclk

34 minutes ago, ShrimpBrime said:

Hey Jumper, when you going sub ambient/ sub zero?

phase cooler died on 3900X couple of months ago, so not anytime soon. new bios is driving nuts as well. on min i can bench 4.85ghz 3800c14, 4000c16 fine, 10 mins later it doesnt post at 3600c14 with everything on auto XD 

5900x came today

2 hours ago, CHR20000 said:

For anybody who's interested, just picked up a Ryzen 5600X, love it already.  All with standard settings.

 

nice, what board do you have?

2 hours ago, Master Disaster said:

@Jumper118You're famous bud...

https://wccftech.com/amd-ryzen-5-5600x-zen-3-cpu-benchmarked-excellent-overclocke-4-85-ghz-across-all-6-cores/

Yeah I been linked this quite a few times now

The closer it gets the less relevant my video and results get now. Plenty of the 5000 cpus are out in the wild now

9 hours ago, Space Reptile said:

Gratz on that 5600X, it clearly smokes my 3600 (3630CB at 4.15ghz, stock pbo @100w and aircooled) 

what does it score in single core at those clocks and how is the powerconsumption? (what would it score when locked to 65w for example) 

single core around 260ish not sure on power as i've not measured it, but at stock its around 1.2v so at 1.25v it will be more. 1.35v i wouldnt think more than 150w

2 hours ago, FlanK3r said:

There are you  ...

 

btw, FCLK 2000 is possible, for more info PM me

ok  on asus? 

Water

https://valid.x86.fr/f0pzvm

16 minutes ago, TetraSky said:

He ordered it on ebay ? ???

What?

Surely it can't be real...

yes ebay there is one on ebay right now, but much higher price than mine. 

great video.  just editing next one now. 

20 minutes ago, ShrimpBrime said:

They still on with that benchmate deal? Can't even submit the score through benchmate though! lol.

 

Do tell the juicy details how you got this chip so fast!!

Bought it on ebay on 30oct thought it was a scam tbh. 

Tracking was provided and it was shipped out next day. Then on Monday when I wake up I get a notification from dpd saying it would arrive in and hour. 

Parcel arrived. Not well packaged, it was a real life 5600x. So I benched it XD

25 minutes ago, ShrimpBrime said:

Just in case you didnt know already, they pulled your subs for violation of NDA. 

No they didn't. They were pulled because I didn't use benchmate. I'm not under nda I had pm about it from admin. 

My X265 scores are still there