Errorcode A2 no post on Maximus Xi code

[hconverse02]

1 minute ago, Bayonett Priest said:

no! blackscreem! no bootup whatsoever

Does it post or get any fan spin?

[Bayonett Priest]

Just now, hconverse02 said:

Does it post or get any fan spin?

fans spin rgb ram lights up and the code is A2 but the screen doesnt react

[hconverse02]

1 minute ago, Bayonett Priest said:

fans spin rgb ram lights up and the code is A2 but the screen doesnt react

Can you take out everything but the cpu, cooler, and 1 ram stick? Make sure to disconnect any usb devices and plug in the cable to the hdmi from the motherboard

[Bayonett Priest]

Just now, hconverse02 said:

Can you take out everything but the cpu, cooler, and 1 ram stick? Make sure to disconnect any usb devices and plug in the cable to the hdmi from the motherboard

tried it too: A2

[hconverse02]

Just now, Bayonett Priest said:

tried it too: A2

Did you just try it or have you already? I want to be sure, also make sure the ram is in the second slot closest to the cpu.

[Bayonett Priest]

16 minutes ago, hconverse02 said:

Did you just try it or have you already? I want to be sure, also make sure the ram is in the second slot closest to the cpu.

yea did it already no change

[hconverse02]

1 hour ago, Bayonett Priest said:

yea did it already no change

Ok after trying everything I know, just rma the motherboard because if you can't even get to boot and the motherboard is giving you the same code after you have changed a bunch of variables, it might be a dud (but it also might not be)

[Bayonett Priest]

5 hours ago, hconverse02 said:

Ok after trying everything I know, just rma the motherboard because if you can't even get to boot and the motherboard is giving you the same code after you have changed a bunch of variables, it might be a dud (but it also might not be)

there is a techstore inmy vicinity should i ask them? they have the tech to test with more variables!

[Tyr-Anastasi]

Have had the same issue today -Remove cmos battary and graphic Card and use the displayport from the i/o penal (from the Intel GPU) -now you should See an Image in the screen and A0 or A2 on the Mainboard (but you can enter into the uefi).

[Paradigmguy]

On 11/9/2018 at 7:31 AM, Bayonett Priest said:

i have a maximus xi code and it got me the errorcode a2 in the pretest

my parrts are

9900k

2080 ti

32gb trident z rgb ram

970 evo

850 w rmx corsair

360 asus rjiujin 

 

itried almost everything.

Start with no drive

With the 970 evo in each slot

970 evo with my barracuda one

barracuda only

 

 

At the back of the motherboard are cmos clear and biosreset i think should i press any of them?

 

I assume you have this working now? I have the same issue. How was your issue solved?