Jump to content

Ryzen 2600X Voltages

AvogadrosDog
 Share
Posted

Hey guys,

 

So I've been browsing for a few hours and I've found other cases but no black-and-white explanations.

 

Basically I'm running a Ryzen 2600X and X470-F mobo cooled by a NZXT Kraken X62 AIO and 2x8Gb 3000 MHz Corsair RAM. I wanted to leave the system on stock to take advantage of XRF2 (I've managed to OC to 4.0 GHz at 1.23v but I've seen videos by multiple source showing that XRF boost is just as good without needing to OC) but when I leave the optimised default loading on the bios my voltages fluctuate around 1.4v and sometimes peaks momentarily to 1.5v which worries me obviously.

 

So my question is is that actually safe and just the Ryzen system doing its thing? Is it just worth switching to a stable 4.0 GHz OC at 1.23v? I've attempted to set a voltage maximum of 1.31v but when I look at Ryzen Master Utility it fluctuates at 1.4-1.5v on the "Voltage Control", why is that?

 

Sorry if this is an old topic but I just want a condensed answer explaining why this is and what should be done.

 

If it helps, I'm looking to game purely with some work here and there (graphical analysis and some programming on programmes such as labVIEW).

 

Thanks guys

Ryzen build -  CPU: Ryzen 7 3700X | Cooler: Corsair H115i Platinum RGB | GPU: RTX 2070 FE | RAM: 2x8GB Corsair Dominator Platinum RGB DDR4-3200MHz | PSU: EVGA SuperNOVA P2 750W | Motherboard: MSI X570 MEG Ace | Storage: Samsung 970 EVO 500 GB - Seagate Barracuda 2TB 7200 RPM | Case: Lian Li PC-O11 Dynamic

 

Intel build - CPU: i5-9600k @ 4.9 GHz - 1.28v | Cooler: NZXT Kraken X62 rev 2 | GPU: GTX 980 Ti FE | RAM: 2x8GB Corsair Vengeace LPX DDR4-3200MHz | PSU: Corsair RM650x  | Motherboard: Gigabyte Z390 Aorus Ultra | Storage: Crucial MX500 500GB - Western Digital Blue 1TB 5400RPM | Case: NZXT H700 Black

 

Laptop - HP Pavillion; CPU: Core i5-7200U | RAM: 8GB DDR4-2133MHz | GPU: Intel HD 620 | Storage: Samsung 128GB SSD - Western Digital 1TB HDD

Link to comment
https://linustechtips.com/topic/985249-ryzen-2600x-voltages/
Share on other sites
Link to post
Share on other sites
Posted
5 minutes ago, xandredu said:

multiple source showing that XRF boost is just as good without needing to OC)

performance, yes. Keep in mind that software control like that is still stupid compared to manual OC, so voltage control is nowhere near as optimized as doing it yourself.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/985249-ryzen-2600x-voltages/#findComment-11875387
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Jurrunio said:

performance, yes. Keep in mind that software control like that is still stupid compared to manual OC, so voltage control is nowhere near as optimized as doing it yourself.

Do you think it would just be better off just doing the manual OC at lower set voltage? I get decent temps on it anyway

Ryzen build -  CPU: Ryzen 7 3700X | Cooler: Corsair H115i Platinum RGB | GPU: RTX 2070 FE | RAM: 2x8GB Corsair Dominator Platinum RGB DDR4-3200MHz | PSU: EVGA SuperNOVA P2 750W | Motherboard: MSI X570 MEG Ace | Storage: Samsung 970 EVO 500 GB - Seagate Barracuda 2TB 7200 RPM | Case: Lian Li PC-O11 Dynamic

 

Intel build - CPU: i5-9600k @ 4.9 GHz - 1.28v | Cooler: NZXT Kraken X62 rev 2 | GPU: GTX 980 Ti FE | RAM: 2x8GB Corsair Vengeace LPX DDR4-3200MHz | PSU: Corsair RM650x  | Motherboard: Gigabyte Z390 Aorus Ultra | Storage: Crucial MX500 500GB - Western Digital Blue 1TB 5400RPM | Case: NZXT H700 Black

 

Laptop - HP Pavillion; CPU: Core i5-7200U | RAM: 8GB DDR4-2133MHz | GPU: Intel HD 620 | Storage: Samsung 128GB SSD - Western Digital 1TB HDD

Link to comment
https://linustechtips.com/topic/985249-ryzen-2600x-voltages/#findComment-11875393
Share on other sites
Link to post
Share on other sites
Posted
1 minute ago, xandredu said:

Do you think it would just be better off just doing the manual OC at lower set voltage? I get decent temps on it anyway

manual OC is definitely better

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/985249-ryzen-2600x-voltages/#findComment-11875399
Share on other sites
Link to post
Share on other sites
Posted
  • Author
24 minutes ago, Jurrunio said:

manual OC is definitely better

Sweet. Thanks!

 

What about running DOCP (XMP)? I've heard it can induce the system to crash but it also sets better timings for RAM?

Ryzen build -  CPU: Ryzen 7 3700X | Cooler: Corsair H115i Platinum RGB | GPU: RTX 2070 FE | RAM: 2x8GB Corsair Dominator Platinum RGB DDR4-3200MHz | PSU: EVGA SuperNOVA P2 750W | Motherboard: MSI X570 MEG Ace | Storage: Samsung 970 EVO 500 GB - Seagate Barracuda 2TB 7200 RPM | Case: Lian Li PC-O11 Dynamic

 

Intel build - CPU: i5-9600k @ 4.9 GHz - 1.28v | Cooler: NZXT Kraken X62 rev 2 | GPU: GTX 980 Ti FE | RAM: 2x8GB Corsair Vengeace LPX DDR4-3200MHz | PSU: Corsair RM650x  | Motherboard: Gigabyte Z390 Aorus Ultra | Storage: Crucial MX500 500GB - Western Digital Blue 1TB 5400RPM | Case: NZXT H700 Black

 

Laptop - HP Pavillion; CPU: Core i5-7200U | RAM: 8GB DDR4-2133MHz | GPU: Intel HD 620 | Storage: Samsung 128GB SSD - Western Digital 1TB HDD

Link to comment
https://linustechtips.com/topic/985249-ryzen-2600x-voltages/#findComment-11875479
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, xandredu said:

Sweet. Thanks!

 

What about running DOCP (XMP)? I've heard it can induce the system to crash but it also sets better timings for RAM?

that's memory overclocking. Risks and benefits that apply to overclocking the CPU also applies here.

CPU: i7-2600K 4751MHz 1.44V (software) --> 1.47V at the back of the socket Motherboard: Asrock Z77 Extreme4 (BCLK: 103.3MHz) CPU Cooler: Noctua NH-D15 RAM: Adata XPG 2x8GB DDR3 (XMP: 2133MHz 10-11-11-30 CR2, custom: 2203MHz 10-11-10-26 CR1 tRFC:230 tREFI:14000) GPU: Asus GTX 1070 Dual (Super Jetstream vbios, +70(2025-2088MHz)/+400(8.8Gbps)) SSD: Samsung 840 Pro 256GB (main boot drive), Transcend SSD370 128GB PSU: Seasonic X-660 80+ Gold Case: Antec P110 Silent, 5 intakes 1 exhaust Monitor: AOC G2460PF 1080p 144Hz (150Hz max w/ DP, 121Hz max w/ HDMI) TN panel Keyboard: Logitech G610 Orion (Cherry MX Blue) with SteelSeries Apex M260 keycaps Mouse: BenQ Zowie FK1

 

Model: HP Omen 17 17-an110ca CPU: i7-8750H (0.125V core & cache, 50mV SA undervolt) GPU: GTX 1060 6GB Mobile (+80/+450, 1650MHz~1750MHz 0.78V~0.85V) RAM: 8+8GB DDR4-2400 18-17-17-39 2T Storage: HP EX920 1TB PCIe x4 M.2 SSD + Crucial MX500 1TB 2.5" SATA SSD, 128GB Toshiba PCIe x2 M.2 SSD (KBG30ZMV128G) gone cooking externally, 1TB Seagate 7200RPM 2.5" HDD (ST1000LM049-2GH172) left outside Monitor: 1080p 126Hz IPS G-sync

 

Desktop benching:

Cinebench R15 Single thread:168 Multi-thread: 833 

SuperPi (v1.5 from Techpowerup, PI value output) 16K: 0.100s 1M: 8.255s 32M: 7m 45.93s

Link to comment
https://linustechtips.com/topic/985249-ryzen-2600x-voltages/#findComment-11875489
Share on other sites
Link to post
Share on other sites
Posted
  • Author
2 minutes ago, Jurrunio said:

that's memory overclocking. Risks and benefits that apply to overclocking the CPU also applies here.

Fair enough. I'll settle with the manual OC to 4 GHz, don't think I really need any more than that to be honest.

 

Thanks for the help!

Ryzen build -  CPU: Ryzen 7 3700X | Cooler: Corsair H115i Platinum RGB | GPU: RTX 2070 FE | RAM: 2x8GB Corsair Dominator Platinum RGB DDR4-3200MHz | PSU: EVGA SuperNOVA P2 750W | Motherboard: MSI X570 MEG Ace | Storage: Samsung 970 EVO 500 GB - Seagate Barracuda 2TB 7200 RPM | Case: Lian Li PC-O11 Dynamic

 

Intel build - CPU: i5-9600k @ 4.9 GHz - 1.28v | Cooler: NZXT Kraken X62 rev 2 | GPU: GTX 980 Ti FE | RAM: 2x8GB Corsair Vengeace LPX DDR4-3200MHz | PSU: Corsair RM650x  | Motherboard: Gigabyte Z390 Aorus Ultra | Storage: Crucial MX500 500GB - Western Digital Blue 1TB 5400RPM | Case: NZXT H700 Black

 

Laptop - HP Pavillion; CPU: Core i5-7200U | RAM: 8GB DDR4-2133MHz | GPU: Intel HD 620 | Storage: Samsung 128GB SSD - Western Digital 1TB HDD

Link to comment
https://linustechtips.com/topic/985249-ryzen-2600x-voltages/#findComment-11875497
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×