Expanding Streaming Setup

[PastaAdventures]

I'm trying to simplify my streaming setup and reduce load on the main pc by adding a dedicated streaming pc, but I have 2 problems I need help with, display and audio.

 

Display:

The main pc is this: https://pcpartpicker.com/list/HmhWfH

Capture card in streaming pc is AVerMedia GC573

Connected to the gpu are the monitors and a Rift.

Port 1 DP is the 1440p 165hz

Port 2 DP is the 1440p 10bit 60hz

Port 1 HDMI is to the Rift

Port 3 DP is to my receiver (using DP to hdmi) which passes though hdmi to the 1080p 60hz

So that means there are no available ports for and output to a capture card. I was thinking of getting a displayport splitter but I'm afraid I am reaching the max output of the gpu.

Just need recommendations on what to do.

 

Audio:

I have 3 output devices

Logitech G933

Philips SHP9500S 

Receiver with 5.1 speaker setup

 

To start, I'm using this to change audio devices via hotkey https://github.com/xenolightning/AudioSwitcher_v1/

 

and Virtual audio cable + https://github.com/audiorouterdev/audio-router to duplicate and route my audio correctly to obs

 

I swap between the G933 and the SHP9500S for different games. So game audio and discord audio are going to the headsets.

The speakers are always for music so winamp/youtube are always routed to the reciever.

 

To prevent music from bleeding into mic when I push to talk I use: https://github.com/PastaAdventures/Volume-Squelcher + an AHK script for delay

 

My current plan is to keep the audio routing the same and just output the result to the audio going to the capture card. That way I'm still able to use Volume Squelcher. But I would like to be able to move to a mixer so if anyone has a solution or guide I could look at, it would be helpful.