Jump to content

Push pull configuration please help

mikedrewsmy
By mikedrewsmy
in Cooling
 Share
Posted
I am planning to replace my Corsair Spec Omega RGB for the NZXT H700i and i want to bring along the fans.
My plan is to do :Radiator : Push - 3x NZXT Aer F120 (came with the case) 21.01~63.02 CFM each
                 Pull -  2x 140mm Corsair LL140 51.5 CFM each
Rear Exhaust : 1x NZXT Aer F140 (Came with the case) 34.48~103.43 CFM each
Top Exhaust : 3x 120mm Corsair LL120 43.25 CFM each
My question would be is it okay for me to use the LL series because their CFM is quite low compared to the Aer P's. But i am loving the RGB lighting.

So You Wanna Be A Playa, But Your Rig's Ain't Fly,
You Gotta Hit Us Up, To Get A Pimped Out Rig,

You've Got To Pimp My Riggggggg...  (DAMN RIGHT)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
5 hours ago, mikedrewsmy said:
I am planning to replace my Corsair Spec Omega RGB for the NZXT H700i and i want to bring along the fans.
My plan is to do :Radiator : Push - 3x NZXT Aer F120 (came with the case) 21.01~63.02 CFM each
                 Pull -  2x 140mm Corsair LL140 51.5 CFM each
Rear Exhaust : 1x NZXT Aer F140 (Came with the case) 34.48~103.43 CFM each
Top Exhaust : 3x 120mm Corsair LL120 43.25 CFM each
My question would be is it okay for me to use the LL series because their CFM is quite low compared to the Aer P's. But i am loving the RGB lighting.

yes, it would be ok

RGB & Fan control ULTIMATE GUIDE !

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I'm bit confused on that config. Are you placing rad front with push-pull config where you have 3 fans pushing and 2 pulling, then have 3  exhausts on top and 1 more at rear?

^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
7 minutes ago, LoGiCalDrm said:

I'm bit confused on that config. Are you placing rad front with push-pull config where you have 3 fans pushing and 2 pulling, then have 3  exhausts on top and 1 more at rear?

Basically that's what I planned at first but now I'm doing 2x 140 push and 2x 140 pull, 3 120s top and 1 140s rear.

So You Wanna Be A Playa, But Your Rig's Ain't Fly,
You Gotta Hit Us Up, To Get A Pimped Out Rig,

You've Got To Pimp My Riggggggg...  (DAMN RIGHT)

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
15 minutes ago, mikedrewsmy said:

Basically that's what I planned at first but now I'm doing 2x 140 push and 2x 140 pull, 3 120s top and 1 140s rear.

Thats too much exhaust for balanced or positive airflow. 1 rear, 1 top would be balanced or even positive with controlled rpms. If you want to make it just look good, have all but limit their rotation speeds to absolute minimum you can.

^^^^ That's my post ^^^^
<-- This is me --- That's your scrollbar -->
vvvv Who's there? vvvv

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
3 hours ago, LoGiCalDrm said:

Thats too much exhaust for balanced or positive airflow. 1 rear, 1 top would be balanced or even positive with controlled rpms. If you want to make it just look good, have all but limit their rotation speeds to absolute minimum you can.

I did. And I could tell u the temperature has never been sweeter :D

So You Wanna Be A Playa, But Your Rig's Ain't Fly,
You Gotta Hit Us Up, To Get A Pimped Out Rig,

You've Got To Pimp My Riggggggg...  (DAMN RIGHT)

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×