speedfan help

[iceflower700]

i built a new computer recently with a 1080ti and a 8700 in a node 202. i put a pwm noctua fan in front of the gpu to blow air right into it, thinking i could just configure the fan to run on the gpu temperatures. This led me to using speedfan. However, i have been having problems, as even though speedfan picks up my gpu, i cannot seem to find the fan in the advanced setting. All of the options lead to temperature offsets. I would appreciate any help in this. There are 4 options in the advanced menu: Geforce video card, HD0, ACPI, and INTEL CORE. The only thing that is not an offset is the DTS interpretation on the intel core at $0 on isa, which im pretty sure is not the fan, as it only can be set to "absolute" or "relative". In addition, some other important information is that in the readings tab right after opening speedfan, I cannot see any fan modules. I can only see the temperatures of certain items.

[LogicalDrm]

Your motherboard uses fan control chip which isn't supported by Speedfan. This is quite common thing for most newer mobos, both on Intel and AMD side. There's no fix, dev has said they can't provide support unless they can get schematics for new controller chips.

[iceflower700]

2 hours ago, LoGiCalDrm said:

Your motherboard uses fan control chip which isn't supported by Speedfan. This is quite common thing for most newer mobos, both on Intel and AMD side. There's no fix, dev has said they can't provide support unless they can get schematics for new controller chips.

alright that confirms my suspicions. Thanks.