Jump to content

computer not turning on

Redsavior11
Go to solution Solved by Christophe Corazza,
2 minutes ago, Christophe Corazza said:

Then we are going to see if your PSU is dead.

 

I suggest you to perform thje "paperclip" test. It's generally used to check if the PSU works or not.

The paperclip trick can tell you if a power supply is bad. No activity generally means a dead PSU.

 

Rather than writing all steps dosn, I think it is better for you to visually see how it is done:

https://www.evga.com/support/faq/afmviewfaq.aspx?faqid=59582

last night i got off my computer and put it to sleep. i woke up this morning and now it doesnt turn on. ive tried to power cables from the wall to the power supply. ive verified that the power strip i plug my computer into works and all the other slots on it work too. i dont know what else to do anyone got any ideas?

Link to comment
Share on other sites

Link to post
Share on other sites

Make sure the connectors are plugged into the mobo properly

PC SPECS: i7 - 3820, 32GB GSkill DDR3 RAM, 2TB Seagate Hybrid Drive, Intel 240GB SSD, Corsair Spec Omega Case, Strix GTX 1060 6GB, Corsair H150i Pro RGB, Corsair CX850M PSU

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Eliptic said:

Make sure the connectors are plugged into the mobo properly

just checked and they are good

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Redsavior11 said:

just checked and they are good

Hmm, not sure then. It sounds like your PSU is fried but I noticed that you already confirmed that its on. Maybe your power button or something is broken. Do you have a power button/switch on your mobo? if so try turning the PC on from there.

PC SPECS: i7 - 3820, 32GB GSkill DDR3 RAM, 2TB Seagate Hybrid Drive, Intel 240GB SSD, Corsair Spec Omega Case, Strix GTX 1060 6GB, Corsair H150i Pro RGB, Corsair CX850M PSU

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Jamisbrill said:

Unplug all the cables going into it and power cycle it 

how do you power cycle it?

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Christophe Corazza said:

Are the standby power lights illuminated on your motherboard?

no nothing turns on at all. nothing happens

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Christophe Corazza said:

 

What is your PSU?

evga 650w 80+gold

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Redsavior11 said:

evga 650w 80+gold

 

EVGA makes several series of power supplies. Some are really rubbish. What series is your PSU?

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Christophe Corazza said:

 

EVGA makes several series of power supplies. Some are really rubbish. What series is your PSU?

the psu says GQ on it im guessing thats the series. ive had the same psu for like 2 and a half years now so maybe its finally died

 

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Redsavior11 said:

the psu says GQ on it im guessing thats the series. ive had the same psu for like 2 and a half years now so maybe its finally died

 

 

The EVGA GQ is a very reputable and decent power supply, so I doubt that this it the culprit. (Although even good components can fail.)

Do you have a second PSU that you can try? (Switching the EVGA for this second one.)

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Christophe Corazza said:

 

The EVGA GQ is a very reputable and decent power supply, so I doubt that this it the culprit. (Although even good components can fail.)

Do you have a second PSU that you can try? (Switching the EVGA for this second one.)

not at the moment sadly

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Redsavior11 said:

not at the moment sadly

 

By the way: have you confirmed that the power button of your case works?

 

Try to turn on your computer without this botton: On your board, usually on the bottom, are the pins you plug your case's power and reset buttons into. Read (in really small print) under those pins to find the power (pwr) pins. Bridge those two with a paperclip or key or something.

Link to comment
Share on other sites

Link to post
Share on other sites

 

1 minute ago, Christophe Corazza said:

 

By the way: have you confirmed that the power button of your case works?

 

Try to turn on your computer without this botton: On your board, usually on the bottom, are the pins you plug your case's power and reset buttons into. Read (in really small print) under those pins to find the power (pwr) pins. Bridge those two with a paperclip or key or something.

oh are you talking about the pins where i plug the power switch into?

Link to comment
Share on other sites

Link to post
Share on other sites

6 minutes ago, Redsavior11 said:

 

oh are you talking about the pins where i plug the power switch into?

 

Yes, the pins for PWR_SW header that goes to the case power button.

 

 

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Christophe Corazza said:

 

Yes, the pins for PWR_SW header that goes to the case power button.

 

 

ok i tried it and nothing happened still

Link to comment
Share on other sites

Link to post
Share on other sites

5 minutes ago, Redsavior11 said:

ok i tried it and nothing happened still

 

Then we are going to see if your PSU is dead.

Link to comment
Share on other sites

Link to post
Share on other sites

1 minute ago, Christophe Corazza said:

 

Then we are going to see if your PSU is dead.

ok how do we check that. test my set up with a different psu?

Link to comment
Share on other sites

Link to post
Share on other sites

Just now, Redsavior11 said:

ok how do we check that. test my set up with a different psu?

 

I'm writing... ;)

Link to comment
Share on other sites

Link to post
Share on other sites

2 minutes ago, Christophe Corazza said:

Then we are going to see if your PSU is dead.

 

I suggest you to perform thje "paperclip" test. It's generally used to check if the PSU works or not.

The paperclip trick can tell you if a power supply is bad. No activity generally means a dead PSU.

 

Rather than writing all steps dosn, I think it is better for you to visually see how it is done:

https://www.evga.com/support/faq/afmviewfaq.aspx?faqid=59582

Link to comment
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×