Jump to content

I just finished my loop today with a 360 radiator, Barrow CPU block, Bitspower GPU block, and Swiftech Maelstrom D5 Reservoir Pump Combo - 300mm, using only distilled water.

As I measure, the water temp in the reservoir is around 27 C or so. The CPU temp ideal at 35 - 40 C and 65 - 70 C under load 100% using OCCT. The GPU temp ideal at 28-32 C and 38 - 40 C under full load using Heaven Benchmark 4.0.

Is it normal? Because I see that the CPU temp is higher in comparison with the AIO cooling I used before.

My rig is:

I7-7700K OC 5.0 1.3V

Asus strix 1080ti OC mode

image.png.1ef0c6390040a7817d73e409a9fbf8fc.png

61 degree C at 27% load????

Is it normal with a custom loop?

Please help! Or any concentrated liquid should I put in my loop?

Link to comment
https://linustechtips.com/topic/930860-custom-loop-with-too-high-cpu-temp/
Share on other sites

Link to post
Share on other sites

Temps seem reasonable to me then. The toothpaste under there can only transfer so much heat for a given time and 1.3v is nothing to scoff at. I've hit the same wall with my 7900x that sits at about 60C when gaming. I plan on sending it off to Silicon Lottery soon so they can work their magic. 

Link to post
Share on other sites

6 minutes ago, r34lj4k3 said:

Temps seem reasonable to me then. The toothpaste under there can only transfer so much heat for a given time and 1.3v is nothing to scoff at. I've hit the same wall with my 7900x that sits at about 60C when gaming. I plan on sending it off to Silicon Lottery soon so they can work their magic. 

For deliding?

Link to post
Share on other sites

Going off the screen shot, there’s an issue. Cpu shouldn’t be that hot during a gpu stress test. And if you weren’t stressing the cpu. Could be a few things but that for sure isn’t right. 

Main RIg Lian Li O11 MINI, I7 9900k, ASUS ROG Maximus XI Hero, G.Skill Ripjaws 3600 32GB, 3090FE, EVGA 1000G5, Acer Nitro XZ3 2560 x 1440@240hz 

 

Spare RIg Lian Li O11 AIR MINI, I7 4790K, Asus Maximus VI Extreme, G.Skill Ares 2400 32Gb, EVGA 1080ti, 1080sc 1070sc & 1060 SSC, EVGA 850GA, Acer KG251Q 1920x1080@240hz 

 

Link to post
Share on other sites

A 360mm rad for that setup is already borderline not enough. You have very hot components on less than 240mm each.... so that is probably part of your problem.

 

The next problem is you probably just lost the lottery on your 7700k and it doesn't have a good transfer of heat from the die to IHS. I also don't know what your bios looks like, but there is a high likely hood it is probably being overvalued quite a bit (very frequent issue)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×