Corsair Power Supply

[PillowSmoke]

Does this power supply http://www.newegg.com/Product/Product.aspx?Item=N82E16817139040 have long enough cables to route in a Rosewill Challenger case?

[Bluejay0]

I believe so. It shouldn't that much of a challenge.

[PillowSmoke]

I believe so. It shouldn't that much of a challenge.

 

lol good one.

[atrash]

You should be good, though I think that case doesn't have any cut out for the 8pin cpu cable so you have to get creative with that.

[PillowSmoke]

there's a slight problem with that power supply. It only has two 6 pin connectors for a gpu. Meanwhile my card needs a 8 pin and a 6 pin connector. 

[Bluejay0]

there's a slight problem with that power supply. It only has two 6 pin connectors for a gpu. Meanwhile my card needs a 8 pin and a 6 pin connector. 

 

I think the best chance for having stable power and the correct connectors is to get a better CU. Other than that, an adpater should be fine.

[PillowSmoke]

I think the best chance for having stable power and the correct connectors is to get a better CU. Other than that, an adpater should be fine.

 

cu?

[quan289]

there's a slight problem with that power supply. It only has two 6 pin connectors for a gpu. Meanwhile my card needs a 8 pin and a 6 pin connector. 

 

Both Newegg and even Corsair have specs the unit out wrong it seems. If you look at images that shows only the cables closely, you would immediately see a 6+2 pin PEG connector (1), one behind it if you zoom in (2), one to the lower right of the 24 pin (3), and the last on the upper left of it (4).

 

Meaning you have enough native connectors to SLI/CFX.

 

The 24 pin connector is 600mm long and the EPS12v/ATX12v connector is 650mm long.