I need some help with those..

[Grigor]

Hello guys i have that rgb strip but i dont know what i need to make it light from 220V can u help me and tell me what i need to do and what i need..

[W-L]

1 minute ago, Grigor said:

Hello guys i have that rgb strip but i dont know what i need to make it light from 220V can u help me and tell me what i need to do and what i need..

Unless you know what your doing I wouldn't suggest trying to wire mains voltage, but you basically need to wire up the transformer at 220V and take the 12V lead, (positive and negative) and connect it to the barrel adapter on the controller unit either by getting an adapter made or cutting the barrel adapter off and splicing it in directly. 

 

I would suggest instead to get a power adapter you plug in as that would be a much simpler solution. 

https://www.amazon.co.uk/BOLWEO-5-5x2-1mm-Switching-Wireless-Cameras-UK-black/dp/B0743F4YS4/ref=sr_1_6?ie=UTF8&qid=1511912378&sr=8-6

 

-Moved to Modding Section- 

[Grigor]

Just now, W-L said:

Unless you know what your doing I wouldn't suggest trying to wire mains voltage, but you basically need to wire up the transformer at 220V and take the 12V lead, (positive and negative) and connect it to the barrel adapter on the controller unit either by getting an adapter made or cutting the barrel adapter off and splicing it in directly. 

 

I would suggest instead to get a power adapter you plug in as that would be a much simpler solution. 

https://www.amazon.co.uk/BOLWEO-5-5x2-1mm-Switching-Wireless-Cameras-UK-black/dp/B0743F4YS4/ref=sr_1_6?ie=UTF8&qid=1511912378&sr=8-6

 

-Moved to Modding Section- 

Thanks. So you mean that  12v 36w led driver is ussles ? 

[W-L]

3 minutes ago, Grigor said:

Thanks. So you mean that  12v 36w led driver is ussles ? 

No it can be used but if your not comfortable splicing and wiring in mains this would be the next best option. 

[Grigor]

Just now, W-L said:

No it can be used but if your not comfortable splicing and wiring in mains this would be the next best option. 

So for that driver i just need connectors ?

[W-L]

1 minute ago, Grigor said:

So for that driver i just need connectors ?

For the DC 12V side you require something like this to go from the two wires into the controller, either will work as long as it's the correct size for the barrel adapter.

[Grigor]

Just now, W-L said:

For the DC 12V side you require something like this to go from the two wires into the controller, either will work as long as it's the correct size for the barrel adapter.

Thank you very much umm and for another side what do i need ?

[W-L]

2 minutes ago, Grigor said:

Thank you very much umm and for another side what do i need ?

That's the 220V side you need marettes or mains rated terminal blocks such as this to wire directly to the mains cable in the wall, it just depends on what electrical standard is within your area.

[Grigor]

Just now, W-L said:

That's the 220V side you need marettes or mains rated terminal blocks such as this to wire directly to the mains cable in the wall, it just depends on what electrical standard is within your area.

Thank you so much

[Grigor]

@W-L Sorry for asking again but that another cable of the led controller where should be plug in ? (not that one that is like circle that is for power supply i guess... another one where.. ? )

[W-L]

Just now, Grigor said:

@W-L Sorry for asking again but that another cable of the led controller where should be plug in ? (not that one that is like circle that is for power supply i guess... another one where.. ? )

I assume this one, it's an IR receiver for the remote, just make sure it's somewhat visible so when your point the remote in that general direction it will be able to change the colors and lighting mode.

[Grigor]

Just now, W-L said:

I assume this one, it's an IR receiver for the remote, just make sure it's somewhat visible so when your point the remote in that general direction it will be able to change the colors and lighting mode.

So this one  will not plug in anywhere ?

[W-L]

Just now, Grigor said:

So this one  will not plug in anywhere ?

No it don't plug into anything, just a sensor basically. 

[Grigor]

Just now, W-L said:

No it don't plug into anything, just a sensor basically. 

Thanks again basically the easyest way is to get Power Supply that sup up to 36w and im ready to go