No POST EZ LED Help Please

[EbolaBoyFTW]

Having Issues with a new build, these are the specs:

MSI Z170A SLI Motherboard
i3-6100
8gb SK Hynix DDR4 2133 (2x4)
ULT-LSP750 750w PSU

When I power on the system, it will not post. The EZ Debug LED For DRAM stays on for about 3 seconds, then switches to CPU for about 1 second, then goes back to the DRAM. This cycle is never-ending, and nothing I have tried has worked. I've tried each stick in each slot, I've tried them in every possible combination of slots, I've rest the bios, I've tried a different motherboard, I've tried a different PSU. Nothing has worked.

Help is greatly appreciated. Thank you.

[Tsuki]

your ram could be toast.

[Valkyrie Lenneth]

probably ram not compatible with the motherboard, if u have feature such as memok u can test it but if the mobo doesnt pick the ramsticks ur out of luck

 

other solution could be checking if the current bios version is compatible with ur cpu ( it probably is so i doubt it )

[Valkyrie Lenneth]

2 minutes ago, Tsuki said:

your ram could be toast.

doubt hes ram is toast, just compatibility issue

[Tsuki]

2 minutes ago, Valkyrie Lenneth said:

doubt hes ram is toast, just compatibility issue

regardless, he'll probably need new ram.

[EbolaBoyFTW]

I ended up figuring it out. The kit I bought wasn't the kit I was sent. I was contacted this morning to return it for the appropriate kit. Thank you anyways guys!