H100iv2 rpm?

[charbel1011]

I installed the h100iv2 but my rpm are not going under 1200 even with a custom curve is this normal?

[pyrojoe34]

Read my signature and make sure you aren't getting sensor interference.

[charbel1011]

2 minutes ago, pyrojoe34 said:

Read my signature and make sure you aren't getting sensor interference.

How can i disable in HWINFO the monitoring for the aio sensors?

[pyrojoe34]

Right click on the AIO in the sensor panel and click "Disable Monitoring".

 

Restart your PC afterwards and make sure it is still disabled.

[charbel1011]

1 minute ago, pyrojoe34 said:

Right click on the AIO in the sensor panel and click "Disable Monitoring".

Never mind i have HWMONITOR not info hwmonitor shows my cpu fan rpm is 900 rpm corsair link says it's 1200 rpm ?

[pyrojoe34]

Just now, charbel1011 said:

Never mind i have HWMONITOR not info

Same issue on that one.

[charbel1011]

1 minute ago, pyrojoe34 said:

Same issue on that one.

SHould i uninstalled hwmonitor? i don't understand what should i do? and why it says on corsair link rpm of my fans are 900 rpm for the cooler but hwmonitor says 900 rpm

[pyrojoe34]

Also, just FYI, the minimum fan speed varies by fan model. It's possible that 1200 is just the minimum you can do with those. However the fans on my H110i GTX and H80i v2 can both go down to 900rpm at 25%, so I don't think that's it.

[pyrojoe34]

1 minute ago, charbel1011 said:

SHould i uninstalled hwmonitor? i don't understand what should i do? and why it says on corsair link rpm of my fans are 900 rpm for the cooler but hwmonitor says 900 rpm

Uninstalling it would fix any conflict issues. But if you want to keep using it you can just disable the AIO sensors in HWmonitor and keep using it for everything else. It's up to you.

[charbel1011]

Just now, pyrojoe34 said:

Uninstalling it would fix any conflict issues. But if you want to keep using it you can just disable the AIO sensors in HWmonitor and keep using it for everything else. It's up to you.

Even if im not using hwmonitor and its closed it will still make problems?

[charbel1011]

4 minutes ago, pyrojoe34 said:

Uninstalling it would fix any conflict issues. But if you want to keep using it you can just disable the AIO sensors in HWmonitor and keep using it for everything else. It's up to you.

Even if i have my hwmonitor closed it will set interferce with corsair link?

[pyrojoe34]

5 minutes ago, charbel1011 said:

Even if im not using hwmonitor and its closed it will still make problems?

As long as it is not running, and not running at startup, then no. However, if you have it running, it may take a restart to get everything back to normal to reset everything.

 

I know when I was dealing with the problem I had to disable it, then restart the PC before it worked correctly. Just disabling it didn't fix it without a restart, you had to make sure it never tried to monitor the sensors upon bootup.

[charbel1011]

Just now, pyrojoe34 said:

As long as it is not running, and not running at startup, then no. However, if you have it running, it may take a restart to get everything back to normal to reset everything.

 

I know when I was dealing with the problem I had to disable it, then restart the PC before it worked correctly. Just disabling it didn't fix it without a restart, you had to make sure it never tried to monitor the sensors upon bootup.

I noticed my CAM programs that shows the temperatures as well was running at startup i guess that was the problem?

[pyrojoe34]

Just now, charbel1011 said:

I noticed my CAM programs that shows the temperatures as well was running at startup i guess that was the problem?

Yes, it could be. Link doesn't like any other software trying to communicate with the AIO. It's just shotty programming but there's no way around it.

[charbel1011]

7 minutes ago, pyrojoe34 said:

Yes, it could be. Link doesn't like any other software trying to communicate with the AIO. It's just shotty programming but there's no way around it.

I just disabled cam from starting up and i didnt open hwmonitor after restart and i deleted speedfan since im not using it and i jad gpu tweak for my vga which i dont use and then i made a second restart and i wanna thank u so much! For this fix my fans now are running accurately and quiet!!!  And i managed to lower the fan under 800 rpm but i left my profile at at corsair link at default which is running at 1100 rpm which isnt a big deal for me. But i have 1 concern only how can i see my temps while gaming? Should i open corsair link on second monitor and see the temps while gaming? Should i count on it for temps is it accurate? Since i cant see my temps without messing up the corsair link

[pyrojoe34]

1 minute ago, charbel1011 said:

I just disabled cam from starting up and i didnt open hwmonitor after restart and i deleted speedfan since im not using it and i jad gpu tweak for my vga which i dont use and then i made a second restart and i wanna thank u so much! For this fix my fans now are running accurately and quiet!!!  And i managed to lower the fan under 800 rpm but i left my profile at at corsair link at default which is running at 1100 rpm which isnt a big deal for me. But i have 1 concern only how can i see my temps while gaming? Should i open corsair link on second monitor and see the temps while gaming? Should i count on it for temps is it accurate? Since i cant see my temps without messing up the corsair link

Glad it worked.

 

Personally I use AIDA64 and customize a sensor panel with the info I want. Just disable the "Asetek LC sensor support" and enable "Corsair sensor support" in the settings and you're good to go.

 

Here's the sensor panel I put in the top right corner of my second monitor. It takes a while to set up nicely but it's worth the time.

[charbel1011]

8 minutes ago, pyrojoe34 said:

Glad it worked.

 

Personally I use AIDA64 and customize a sensor panel with the info I want. Just disable the "Asetek LC sensor support" and enable "Corsair sensor support" in the settings and you're good to go.

 

Here's the sensor panel I put in the top right corner of my second monitor. It takes a while to set up nicely but it's worth the time.

It says buy now? do i have to buy it?

[pyrojoe34]

4 minutes ago, charbel1011 said:

It says buy now? do i have to buy it?

There's a free version you can use if you don't want to buy it.

[charbel1011]

Just now, pyrojoe34 said:

There's a free version you can use if you don't want to buy it.

May you please send me that free version? because all see is trial version thank you

[charbel1011]

3 minutes ago, pyrojoe34 said:

There's a free version you can use if you don't want to buy it.

There's no free version unless u start downloading torrents and crack keys which i don't want

[pyrojoe34]

2 minutes ago, charbel1011 said:

There's no free version unless u start downloading torrents and crack keys which i don't want

Unless they changed it you can just download it as a trial. It's just not fully featured.

[charbel1011]

Just now, pyrojoe34 said:

Unless they changed it you can just download it as a trial. It's just not fully featured.

 why would i download the trial if i aint going to buy it and then the trial finish :l and i can't do nothing?

[pyrojoe34]

4 minutes ago, charbel1011 said:

 why would i download the trial if i aint going to buy it and then the trial finish :l and i can't do nothing?

I thought the trial doesn't have a time limit? It just doesn't have all ther features in it.

 

Anyway, that's just the program I use... (but I have the full version now so I don't remember the trial much).

[charbel1011]

1 minute ago, pyrojoe34 said:

I thought the trial doesn't have a time limit? It just doesn't have all ther features in it.

 

Anyway, that's just the program I use... (but I have the full version now so I don't remember the trial much).

anything else good i can use to monitor my temps and i dont cause problems with corsair link?

[pyrojoe34]

11 minutes ago, charbel1011 said:

anything else good i can use to monitor my temps and i dont cause problems with corsair link?

I used to use HWinfo and just disabled the AIO sensors in it.