At wits end- no post

[Krills]

Hello! 

I am currently at wits end on my PC build. The PC will not post. I have tried a different psu, breadboarding, I even Rma'd my motherboard order because I thought it had to be the missing link ( it wasn't) 

Build;

https://pcpartpicker.com/list/jRjVQV

I have connected the speaker to the mobo, but I don't even get beep codes or qcodes. 

I feel like I've tried everything to get this damn thing to post and there is nothing I can do.

Any tips? 

[Guest]

Do you get any indication that it is receiving power? Mobo lights?

[MoonlightSylv]

Does it do anything at all? Or just nothing. Check to make sure the front panel connectors are wired correctly and that the PSU switch is on.

[SquintyG33Rs]

it's probably a ram issue

[BubblyCharizard]

2 minutes ago, ShadowTechXTS said:

Does it do anything at all? Or just nothing. Check to make sure the front panel connectors are wired correctly and that the PSU switch is on.

4 pin CPU connector, and 24 pin ATX connector.

 

Also remember Ryzen doesn't have integrated graphics, so you cant use the DVI port on the board

[MoonlightSylv]

Just now, BubblyCharizard said:

4 pin CPU connector, and 24 pin ATX connector.

 

Also remember Ryzen doesn't have integrated graphics, so you cant use the DVI port on the board

Did you mean to quote the OP? 

[BubblyCharizard]

1 minute ago, ShadowTechXTS said:

Did you mean to quote the OP? 

OP gets it anyway, it was an addition to the post before for additional things to try

[Krills]

The CPU fan and psu fan are running. Yeah my psu is on my optical drive seems to work just fine when I turn it on however.

[Krills]

1 minute ago, Krills said:

The CPU fan and psu fan are running. Yeah my psu is on my optical drive seems to work just fine when I turn it on however.

Also I tried using my graphics card in instead of integrated, which is wierd considering there's a dvi port on the mobo that a ryzen chip wouldn't have integrated graphics. I believe the motherboard doesn't have lights( its pretty cheap), so I cant see the current condition of it.

[BubblyCharizard]

3 minutes ago, Krills said:

Also I tried using my graphics card in instead of integrated, which is wierd considering there's a dvi port on the mobo that a ryzen chip wouldn't have integrated graphics. I believe the motherboard doesn't have lights( its pretty cheap), so I cant see the current condition of it.

the DVI port is there for bristol ridge APUs (not Summit Ridge/ryzen CPUs) as AMD hasn't released an APU for ZEN yet does the graphics card work in another build? could be a bad card or output.

[Krills]

1 minute ago, BubblyCharizard said:

the DVI port is there for bristol ridge APUs (not Summit Ridge/ryzen CPUs) as AMD hasn't released an APU for ZEN yet does the graphics card work in another build? could be a bad card or output.

I can try.

 

[Krills]

14 minutes ago, Krills said:

I can try.

 

Nope. Nothing. I borrowed a (funtioning) 750 ti to see if the graphics was the problem. So the 1050 ti is not the problem 

[Changis]

have you reset your bios?