overheating Overheating Cpu, Fan problem

[Uvalic]

I say sorry in advance for bad English and my bad knowledge about computer!

 

Hi I have had some problem lately, Cpu have been overheating arounf 80-90 Celsius around 40% use. Problem i have come up with is that bios dont recognise my fans. And i Think its because of the Fan hub fron NZXT and Deepcool,

So my specs are

Motherboard: Z170 , bios vers 1206

Cpu: Intel Core i7-6700K Skylake

GPU: Msi Gtx geforxe 770gt 4gb

Cpu Cooler: Deepcool maelstrom 120t

2 x Corsair Air Series AF120 Quiet edition on the CPU Cooler

Case: NZXT H440W Silent Ultra

RAM: Kingstons Hyperx 2x 8 2133 Mhz

Harddrives 2 x 500 gb

SSD: Samsung 128 gb

Images :

Total 6 fans in the case , 2 on cpu cooler , 4 around the case

i have set the cpu coolers pump into CPU_OPT and the cpu fans to a hub and then to CPU_FAN, The other fans are connect to a FAN through NZXT HUB

So im wondering how to fix this overheating problem, in the bios i have set min to 200 rpm but cannot apply,

 

 

 

[Alesek]

are your fans actually spinning?

[Uvalic]

Just now, Alesek said:

are your fans actually spinning?

Yes they are, i think they all spinning in same speed

 

[Alesek]

how fast? at those temps they should be going on 100%. You can download speedfan or hwmonitor to check the fan speed.

also check if the pump is working

[Uvalic]

How do i check if pump is working?, i downloaded both program to check the speed of the fan but they didnt find the fans.

[Alesek]

put a hand on the pump if it is vibrating a bit.

dont forget to quote people or they wont get notification 

[Uvalic]

4 minutes ago, Alesek said:

put a hand on the pump if it is vibrating a bit.

dont forget to quote people or they wont get notification 

yea my bad! The pump slightly vibrate

[Alesek]

try to connect the fans directly to the mobo without the splitter and see what happens

[Uvalic]

2 hours ago, Alesek said:

try to connect the fans directly to the mobo without the splitter and see what happens

So i did that now, bios did find now one fan, but the still not the other so the problem its on the HUB?

[Alesek]

15 hours ago, Uvalic said:

So i did that now, bios did find now one fan, but the still not the other so the problem its on the HUB?

might be. does the hub need an extra power connector?

[Uvalic]

4 hours ago, Alesek said:

might be. does the hub need an extra power connector?

No, so i tested everything,fans worked and i speed them up to Turbo(max speed) and saw that the coolingsystem does nothing to the cpu, at idle its goes upp to 80 C so i think its the pump that doesn´t working, day after tomorrow ill get a fancooler and see if it will work.

 

[Alesek]

this might be a stupid question, but... did you take off the plastic foil from the cooler before you mounted it on the mobo?

[Uvalic]

1 hour ago, Alesek said:

this might be a stupid question, but... did you take off the plastic foil from the cooler before you mounted it on the mobo?

Haha, yes i did it had pre-coolerpasta on it

[Alesek]

32 minutes ago, Uvalic said:

Haha, yes i did it had pre-coolerpasta on it

you can try to reseat the cooler