Strix 1080 SLI Issue

[TootY]

Hi all,

 

Wondering if someone would be able to offer some help with a random problem I've come across. I currently have 2X ASUS Strix 1080's in SLI with the HB Bridge. Now what I've come across is when I swap the cards into different slots they seem to perform much different, which I don't understand why this is happening. I've attached a few screenshots of differences, if someone would be able to assist in this weird problem it would be greatly appreciated.

 

 

GPU-Z Sensor Log.txt

[Guest Generallee]

Could be thermals, could be PCI-E lanes

[Jredmond]

Should be runing in 8x each if you have the Strix Z270E i have the same board too but i just run a single 1060 but from my understanding they both run at 8x maybe one is running at 16x? 

[TootY]

1 hour ago, Generallee said:

Could be thermals, could be PCI-E lanes

Temperatures aren't above 36c - shouldn't be.

 

1 hour ago, Jredmond said:

Should be runing in 8x each if you have the Strix Z270E i have the same board too but i just run a single 1060 but from my understanding they both run at 8x maybe one is running at 16x? 

 

Both running 8X. Also, those shots were taken on my X99 system. The cards have come over and the results are the same as the lowest. 

[Qwweb]

1 hour ago, AJLedbetter123 said:

 

3 minutes ago, AJLedbetter123 said:

those shots were taken on my X99 system

What kind of witchcraft are you using to run a 7700K on X99?

[TootY]

I meant to say I was testing these cards also on my X99 system. It seemed to follow the cards

[TootY]

Any thoughts on the above?