Jump to content

how screwed am I?

Kuzma
By Kuzma
in Troubleshooting
 Share
Posted

Well I was BCLK overclocking (since I have a xeon) and it was fine O.o cinebenched fine and ran fine on a few other stress tests , then booted up battlefield 3 and I went straight into a BSOD, cleared CMOS and booted into my BIOS and reset my settings just to make sure that the OC was reverted - I booted back up (went into windows since I'm dual booting 7 and ubuntu ) and :/ it BSODed again and since it's infinitely BSODed , managed to finally boot into Windows and started up skype - pressed the call button and BSODed :/ so I tried to boot up into Ubuntu and Kernal Panic - not syncing: Fatal Machine check with Processor context corrupt ? I used the MemOK! Feature on my motherboard to check my ram so that's fine - I tried swapping out the hard drive with another hard drive I have that I was supposed to format since it's bitlocked and it made it to the bitlocked screen perfectly fine :( I'm really at a loss of what to do >_< I can boot into Windows but I get BSODed most of the time during the starting windows screen

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/
Share on other sites
Link to post
Share on other sites
Posted

Did you manually reset the settings or did you go with the Bios' reset all?

 

When you cleared CMOS, were the settings changed when you looked in BIOS? Or did you still have to manually change it? If you had to manually change it, maybe consider pulling out the battery?

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883641
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Did you manually reset the settings or did you go with the Bios' reset all?

When you cleared CMOS, were the settings changed when you looked in BIOS? Or did you still have to manually change it? If you had to manually change it, maybe consider pulling out the battery?

yeah they were all reset

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883667
Share on other sites
Link to post
Share on other sites
Posted
  • Author

You made sure to change all your other multipliers like PCI clock when doing fsb OC right?

uuuuh no? X.X

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883674
Share on other sites
Link to post
Share on other sites
Posted

uuuuh no? X.X

Thing is 1155 socket is overclock by FSB is kind of hard.

 

I'm not certain since I've only worked with one Intel board in my life, but when you raise FSB you're going to be bumping clocks for everything (specifically PCI lanes) which can't really handle that much of an increase which could very likely damage your board. 

 

Going to need someone else to confirm.

 

not socket 1155 , I'm socket 1366 :P so x58

Regardless, if the motherboard didn't have PCI clock set to auto or manually adjusted an FSB overclock could deviate lane clocks too far to the point of damage to either motherboard or GPU.

 

(again don't quote me on this) 

Error: 410

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883692
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Thing is 1155 socket is overclock by FSB is kind of hard.

I'm not certain since I've only worked with one Intel board in my life, but when you raise FSB you're going to be bumping clocks for everything (specifically PCI lanes) which can't really handle that much of an increase which could very likely damage your board.

Going to need someone else to confirm.

not socket 1155 , I'm socket 1366 :P so x58

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883702
Share on other sites
Link to post
Share on other sites
Posted

not socket 1155 , I'm socket 1366 :P so x58

do you have any chance to trying the cpu on other board? or do you have any other 1366 cpu's ?

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!! dId i WiN teH SiLiCON LotTerrY? yOu ShoUlD dEsHrOuD uR GPU. my SYstEm iS UNDerPerforMiNg iN WarzONE. can mY Pc Run WiNdOwS 11 ?? woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18! jellYfIn Client siDE TRanscoDinG

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883793
Share on other sites
Link to post
Share on other sites
Posted
  • Author

do you have any chance to trying the cpu on other board? or do you have any other 1366 cpu's ?

no I do not :/

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883842
Share on other sites
Link to post
Share on other sites
Posted

no I do not :/

have you tried values (fsb) that is lower than stock and have you tried increasing uncore voltage (vtt)

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!! dId i WiN teH SiLiCON LotTerrY? yOu ShoUlD dEsHrOuD uR GPU. my SYstEm iS UNDerPerforMiNg iN WarzONE. can mY Pc Run WiNdOwS 11 ?? woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18! jellYfIn Client siDE TRanscoDinG

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883851
Share on other sites
Link to post
Share on other sites
Posted
  • Author

have you tried values (fsb) that is lower than stock and have you tried increasing uncore voltage (vtt)

I have not but I will try that now thanks :D

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883859
Share on other sites
Link to post
Share on other sites
Posted
  • Author

have you tried values (fsb) that is lower than stock and have you tried increasing uncore voltage (vtt)

Okay so I managed to boot but after a little bit it BSODed again so?

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883960
Share on other sites
Link to post
Share on other sites
Posted

Okay so I managed to boot but after a little bit it BSODed again so?

set everything to default and RMA THE THING MAN DONT TOUCH IT but seriusly dont do any riscy stuff 

If you tell a big enough lie and tell it frequently enough it will be believed.

-Adolf Hitler 

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-883975
Share on other sites
Link to post
Share on other sites
Posted
  • Author

set everything to default and RMA THE THING MAN DONT TOUCH IT but seriusly dont do any riscy stuff

The question is what's the issue here? I believe it's the HDD since I've had quite a few issues with it in the past :/ and Windows constantly wants to check it for consistency but it could also be the cpu... If it's the CPU I'll just buy a new one :/ it cost like £30 so not too much of a blow *shrug*

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-884074
Share on other sites
Link to post
Share on other sites
Posted

Always try safe mode. Does safe mode work?

Asrock 890GX Extreme 3 - AMD Phenom II X4 955 @3.50GHz - Arctic Cooling Freezer XTREME Rev.2 - 4GB Kingston HyperX - AMD Radeon HD7850 - Kingston V300 240GB - Samsung Spinpoint F3 1TB - Chieftec APS-750 - Cooler Master HAF912 PLUS


osu! profile

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-884112
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Always try safe mode. Does safe mode work?

I can acc boot in normal mode :/ safe mode gets me nowhere - well created an ubuntu usb and looks like I'll be running off of that till I get a HDD xD gonna test the USB and if that doesn't work then we know it's the CPU ^_^

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-884128
Share on other sites
Link to post
Share on other sites
Posted

The question is what's the issue here? I believe it's the HDD since I've had quite a few issues with it in the past :/ and Windows constantly wants to check it for consistency but it could also be the cpu... If it's the CPU I'll just buy a new one :/ it cost like £30 so not too much of a blow *shrug*

which option seemed to help? also with that being said increase vcore and uncore and see if it will help

mY sYsTeM iS Not pErfoRmInG aS gOOd As I sAW oN yOuTuBe. WhA t IS a GoOd FaN CuRVe??!!? wHat aRe tEh GoOd OvERclok SeTTinGS FoR My CaRd??  HoW CaN I foRcE my GpU to uSe 1o0%? BuT WiLL i HaVE Bo0tllEnEcKs? RyZEN dOeS NoT peRfORm BetTer wItH HiGhER sPEED RaM!!! dId i WiN teH SiLiCON LotTerrY? yOu ShoUlD dEsHrOuD uR GPU. my SYstEm iS UNDerPerforMiNg iN WarzONE. can mY Pc Run WiNdOwS 11 ?? woUld BaKInG MY GRaPHics card fIX it? MultimETeR TeSTiNG!! aMd'S GpU DrIvErS aRe as goOD aS NviDia's YOU SHoUlD oVERCloCk yOUR ramS To 5000C18! jellYfIn Client siDE TRanscoDinG

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-884133
Share on other sites
Link to post
Share on other sites
Posted (edited)

I can acc boot in normal mode :/ safe mode gets me nowhere - well created an ubuntu usb and looks like I'll be running off of that till I get a HDD xD gonna test the USB and if that doesn't work then we know it's the CPU ^_^

Bear in mind it could still be GPU/MB. Before you rule that CPU is broken, take it to a PC shop and have them test it for you. 

 

Like I said, high FSB clocks without compensating have been known to kill GPUs and motherboards. 

 

I didn't think you had onboard, might actually be HDD then. 

Edited by helping

Error: 410

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-884159
Share on other sites
Link to post
Share on other sites
Posted
  • Author

which option seemed to help? also with that being said increase vcore and uncore and see if it will help

Increasing vcore helped but after increasing vcore, booting up once for a while then bsod and then resetting back to stock it worked for the same amount of time as if I'd upped the vcore? I have no control over the fsb and I can't add anything to the uncore voltage it seems as there's no option for it? I managed to put ubuntu on a usb in the short period of time I had in windows and guess what? It worked fine (besides the lack of gpu drivers :P thank you nvidia) and I heard it start up through the headphones in my onboard graphics that rules out my motherboard I guess and my cpu (since I booted?) And my gpu I think so that pretty much leaves my hdd ? :/

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-884211
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Okay been using this for about 30minutes now and it's running fine? I'm not too sure though and am yet to put it under load so just incase I'm creating a multi-usb for win 7 / ubuntu so that I can install them on the other HDD if need be.

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-884350
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Okay upping the voltage got it stable ^_^ but it's 78~ degrees idle... :/ so yeah xD

Console optimisations and how they will effect you | The difference between AMD cores and Intel cores | Memory Bus size and how it effects your VRAM usage |
How much vram do you actually need? | APUs and the future of processing | Projects: SO - here

Intel i7 5820l @ with Corsair H110 | 32GB DDR4 RAM @ 1600Mhz | XFX Radeon R9 290 @ 1.2Ghz | Corsair 600Q | Corsair TX650 | Probably too much corsair but meh should have had a Corsair SSD and RAM | 1.3TB HDD Space | Sennheiser HD598 | Beyerdynamic Custom One Pro | Blue Snowball

Link to comment
https://linustechtips.com/topic/64593-how-screwed-am-i/#findComment-884813
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Troubleshooting

×