BIOS CPU temp wrong??

[Saiyan]

My fans are constantly running @ 100% (2000rpm) plugged into my Corsair h100i GTX fan headers and I get a CPU temp of 32 Celsius. However when I plug my fans into my motherboard and run them at the same full speed 2000 rpm, my CPU temp is read at 99 Celsius in BIOS, CAM, CoreTemp, and RealTemp. I don't get how just changing the connection place of the fans (not even changing their speeds) sends my CPU from frosty temps all the way to O shit lets boil some of this water.

[kalious78]

may well be wrong but 100% n 32c unless that's gaming and not "idle" seems a odd to start with.

 

I'm sat at 34c browsing and watching youtube atm on a h60 with 1 fan as outtake at around 1000rpm and 40000rpm for my pump.

 

[Saiyan]

8 minutes ago, kalious78 said:

may well be wrong but 100% n 32c unless that's gaming and not "idle" seems a odd to start with.

 

I'm sat at 34c browsing and watching youtube atm on a h60 with 1 fan as outtake at around 1000rpm and 40000rpm for my pump.

 

No it's idle / browsing / youtube 31-34 Celsius. My fans max are 2000 RPM both pushing as exhaust through the 240mm Rad out the top of my case. But when I plug them into the mobo CPU fan headers instead I get 99 Celsius at full speed with my fans too. 

[kalious78]

Just now, Saiyan said:

No it's idle / browsing / youtube 31-34 Celsius. My fans max are 2000 RPM both pushing as exhaust through the 240mm Rad out the top of my case. 

seems a lil hot to me then and the noise would certainly be pissing me off with both fans maxed, as for your original question I cant help there though sorry m8.

 

maybe you live in a desert

[Saiyan]

3 minutes ago, kalious78 said:

seems a lil hot to me then and the noise would certainly be pissing me off with both fans maxed, as for your original question I cant help there though sorry m8.

 

maybe you live in a desert

It's fine. I'll probably end up RMA'ing my H100i GTX because it's never detected by Corsair Link software which was my first huge problem. So hopefully with a new cooler I'll be able to use that to adjust the fan temps no problem. If that doesn't work I need to look at different watercoolers. 

[kalious78]

sound stupid and I assume you do but you have got the pump hooked up right in a chassis slot and checked its speed ?

 

[Saiyan]

Just now, kalious78 said:

sound stupid and I assume you do but you have got the pump hooked up right in a chassis slot and checked its speed ?

 

As for the pump I know it's screwed in tight.. and the link data cable to use Corsair Link is plugged in. Hell I even bought NZXT's motherboard USB expansion so I could use it (my front case USB are plugged into the expansion so I know it works) and the other day I was messing around with the link data cable and unplugged it and re plugged it in and my pump LED turned blue ... -> installed Link -> not detected    .....I even contacted support and they told my CAM software was my problem so i un installed that... installed Link... Not detected....