GPU not displaying

[LycheeJelly]

Hi everyone GPU is not displaying anymore 

CPU: Intel i7 4690k

Mother Board: Asus Z97-A

Ram: G.Skill Ripjaws X Series 16GB

Hard Drive/SSD: Western Digital Caviar Blue 1TB - Samsung 840 EVO 250GB

Video Card: XFX 290 Double Dispensation 

PSU: EVGA 650W 80+ Gold 

OS: Windows 10

(BackRound)

This afternoon I was playing overwatch and I received a call to go pick up a package.  

Leaving my computer on I went to go run that errand.

 

Coming back to my room I notice my computer was on hibernation which is strange since I permanently disabled the feature. Fired the system up and no display, even my keyboard and mouse wasn't lighting up after boot.

After a couple of attempts I decided to take out my GPU and switch the hdmi cable and hooked it up through the mother board. The system fired normally with everything being read without the GPU. After putting the GPU back into my rig I noticed a red light displayed on the PCIEX16 slot 1, however the fans and led were on. Tried to switch it to PCIEX16 slot 2 (No Red LED on motherboard) fans and led turned on but no display mouse and keyboard did not light up. Do I have a dead card or do I have a bad 6 pin PCI cable?

 

[JakeNTech]

56 minutes ago, LycheeJelly said:

Hi everyone GPU is not displaying anymore 

CPU: Intel i7 4690k

Mother Board: Asus Z97-A

Ram: G.Skill Ripjaws X Series 16GB

Hard Drive/SSD: Western Digital Caviar Blue 1TB - Samsung 840 EVO 250GB

Video Card: XFX 290 Double Dispensation 

PSU: EVGA 650W 80+ Gold 

OS: Windows 10

(BackRound)

This afternoon I was playing overwatch and I received a call to go pick up a package.  

Leaving my computer on I went to go run that errand.

 

Coming back to my room I notice my computer was on hibernation which is strange since I permanently disabled the feature. Fired the system up and no display, even my keyboard and mouse wasn't lighting up after boot.

After a couple of attempts I decided to take out my GPU and switch the hdmi cable and hooked it up through the mother board. The system fired normally with everything being read without the GPU. After putting the GPU back into my rig I noticed a red light displayed on the PCIEX16 slot 1, however the fans and led were on. Tried to switch it to PCIEX16 slot 2 (No Red LED on motherboard) fans and led turned on but no display mouse and keyboard did not light up. Do I have a dead card or do I have a bad 6 pin PCI cable?

 

Sounds like your GPU is dead. Try putting it in a different computer see if that helps, if it dose then it cold be the mobo.

[Keesler]

like fixitnow said try in another computer if you can, if you have an old card around you can throw it in to see if the mobo might be the problem