AIO Cooler Help

[darkninja8888]

Hi I was wondering if my AIO cooler would fit my case (both rad and enough tubing to get to the cpu socket). I'm very new to liquid cooling. Here is my build http://pcpartpicker.com/list/J8GNQV. Thanks!

[HazeTheBeater]

Your case has a 240mm spot on the top, So yeah you can fit the radiator in there but you needa check if the AIO Supports LGA 1151 (Your socket) 

[darkninja8888]

10 minutes ago, HazeTheBeater said:

Your case has a 240mm spot on the top, So yeah you can fit the radiator in there but you needa check if the AIO Supports LGA 1151 (Your socket) 

The radiator is 280mm so where should I put it? Should I just get a 240mm instead so I can put it on top?

[HazeTheBeater]

This might help :

• Included fans: 1x 120mm front intake, 1x 120mm rear exhaust.
• Fan mounts: 2x 140mm or 3x 120mm front, 2x 120/140mm roof, 1x 120mm rear.
• 120mm radiator mounts: 120mm/240mm/360mm front, 120mm rear.
• 140mm radiator mounts: 140mm/280mm front.

[HazeTheBeater]

According to this, You can stick a 280mm On the front

[darkninja8888]

31 minutes ago, HazeTheBeater said:

According to this, You can stick a 280mm On the front

Ive heard the front doesn't get as good of air flow should I go with a 240 on top?

[HazeTheBeater]

If the roof is the top according to 

Fan mounts: 2x 140mm or 3x 120mm front, 2x 120/140mm roof

You can put a 280mm on the the roof or a 240, either one of both

[HazeTheBeater]

Btw the case is designed for the front to get a lot of airflow

 

[darkninja8888]

11 hours ago, HazeTheBeater said:

Btw the case is designed for the front to get a lot of airflow

 

So it would be okay in front?

[HazeTheBeater]

Yeah man

[FrankV]

On 7/14/2016 at 6:15 PM, darkninja8888 said:

Hi I was wondering if my AIO cooler would fit my case (both rad and enough tubing to get to the cpu socket). I'm very new to liquid cooling. Here is my build http://pcpartpicker.com/list/J8GNQV. Thanks!

Lot folks don't seem to realize that you can filter completed builds for part combinations on PC Part Picker. So, to answer your question I present this list of builds: 

 

http://pcpartpicker.com/builds/#h=4,328&e=1186

 

Uses the h100 GTX and the same case. That is a fairly standard AIO cooler. I belive it'd be a 240mm - Same size I run (build in signature)