Jump to content

2 Way Mainboard

Blu82b
 Share
Posted

Hey i`d like to know if the Asus Z10PE-D16 would be a good board for a System with two Xeon E5 2630v3 CPU`s?

 

I will do mostly Videoencoding and 3D Stuff (Blender, 3ds max,.....)

 

Mainboard: https://www.asus.com/Commercial-Servers-Workstations/Z10PED16/

CPU: http://ark.intel.com/products/83356/Intel-Xeon-Processor-E5-2630-v3-20M-Cache-2_40-GHz

 

cheers!

My Hardware

Link to comment
https://linustechtips.com/topic/591717-2-way-mainboard/
Share on other sites
Link to post
Share on other sites
Posted
2 minutes ago, Blu82b said:

Hey i`d like to know if the Asus Z10PE-D16 would be a good board for a System with two Xeon E5 2630v3 CPU`s?

 

I will do mostly Videoencoding and 3D Stuff (Blender, 3ds max,.....)

 

Mainboard: https://www.asus.com/Commercial-Servers-Workstations/Z10PED16/

CPU: http://ark.intel.com/products/83356/Intel-Xeon-Processor-E5-2630-v3-20M-Cache-2_40-GHz

 

cheers!

4 USB ports... Meh. 

Also, what do you need TWO 2630v3 chips for? 

Fine you want the PSU tier list? Have the PSU tier list: https://linustechtips.com/main/topic/1116640-psu-tier-list-40-rev-103/

 

Stille (Desktop)

Ryzen 9 3900XT@4.5Ghz - Cryorig H7 Ultimate - 16GB Vengeance LPX 3000Mhz- MSI RTX 3080 Ti Ventus 3x OC - SanDisk Plus 480GB - Crucial MX500 500GB - Intel 660P 1TB SSD - (2x) WD Red 2TB - EVGA G3 650w - Corsair 760T

Evoo Gaming 15"
i7-9750H - 16GB DDR4 - GTX 1660Ti - 480GB SSD M.2 - 1TB 2.5" BX500 SSD 

VM + NAS Server (ProxMox 6.3)

1x Xeon E5-2690 v2  - 92GB ECC DDR3 - Quadro 4000 - Dell H310 HBA (Flashed with IT firmware) -500GB Crucial MX500 (Proxmox Host) Kingston 128GB SSD (FreeNAS dev/ID passthrough) - 8x4TB Toshiba N300 HDD

Toys: Ender 3 Pro, Oculus Rift CV1, Oculus Quest 2, about half a dozen raspberry Pis (2b to 4), Arduino Uno, Arduino Mega, Arduino nano (x3), Arduino nano pro, Atomic Pi. 

Link to comment
https://linustechtips.com/topic/591717-2-way-mainboard/#findComment-7699858
Share on other sites
Link to post
Share on other sites
Posted
  • Author
1 minute ago, Brink2Three said:

4 USB ports... Meh. 

Also, what do you need TWO 2630v3 chips for? 

Faster Encoding, faster Rendering, faster physic simulations,...  And afaik i cant get 16 Cores / 32 Threads for "just" 1400.-  (at least in Switzerland) with a single CPU System. Its the cheapest setup i found to get that much cores.

My Hardware

Link to comment
https://linustechtips.com/topic/591717-2-way-mainboard/#findComment-7699895
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×