Jump to content

Overclocking fx6300

JonaChan
 Share
Go to solution Solved by OnekillWalter,

copy pasta from an old reply to a similar thread: 

 

my Fx-6300 is Oc to 4.6ghz with a CM Hyper 212 Evo. mobo is an Asrock 970 Extreme3 R2.0. purrs like a kitten.

 

edit: My bios settings looks like that: 

 

OC Mode : Manual

then another option will appear Overclock mode yadada: manual

my Cpu Frequency : 214

pce : stays at 100

 

spread spectrum : disabled

Cpu active core control : all cores

Amd turbo core: disabled

Amd power management: disabled

 

Multiplier voltage : manual

Cpu multiplier : 21.5 @ 4601mhz

cpu volt @1.4625

 

and leave the rest as it is.

Go to the ADVANCED page and cpu config

disabled everything except: Secure Virtual mode.

Posted

Specs 

amd fx6300 cpu 

gtx750ti gpu

corsair230t case

corsair cx600 psu 

Msi gaming 970 mobo 

what clock speed can I get to via oc? (with 212 hyper evo)

 

I am planning to buy a gpu (gtx970) but can't afford a cpu but I can afford a cooler. I want fx6300 to be the best companion to gtx970.

 

thanks

any help would be appreciated 

 

 

 

 

 

 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Depends on the chip. You could get a good one you could get a bad one and you won't find out until you try it. Do you have a moment for out lord and savior r9 390?

Tip to those that are new on LTT forum- quote a post so that the person you are quoting gets a notification, otherwise they'll have no idea that you did. You can also use a tag such as @Ryoutarou97 (replace my username with anyone's. You should get a dropdown after you type the "@")to send a notification, but quoting is preferable.

 

Feel free to PM me about absolutely anything be it tech, math, literature, etc. I'll try my best to help. I'm currently looking for a cheap used build for around $25 to set up as a home server if anyone is selling.

 

If you are a native speaker please use proper English if you can. Punctuation, capitalization, and spelling are as important to making your message readable as proper night theme formatting is.

 

My build is fully operational, but won't be posted until after I get a GPU in it and the case arted up.

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Solution

copy pasta from an old reply to a similar thread: 

 

my Fx-6300 is Oc to 4.6ghz with a CM Hyper 212 Evo. mobo is an Asrock 970 Extreme3 R2.0. purrs like a kitten.

 

edit: My bios settings looks like that: 

 

OC Mode : Manual

then another option will appear Overclock mode yadada: manual

my Cpu Frequency : 214

pce : stays at 100

 

spread spectrum : disabled

Cpu active core control : all cores

Amd turbo core: disabled

Amd power management: disabled

 

Multiplier voltage : manual

Cpu multiplier : 21.5 @ 4601mhz

cpu volt @1.4625

 

and leave the rest as it is.

Go to the ADVANCED page and cpu config

disabled everything except: Secure Virtual mode.

may your framerates be high and your temperatures be low. #pcmr

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author
On 4/20/2016 at 9:01 AM, OnekillWalter said:

copy pasta from an old reply to a similar thread: 

 

my Fx-6300 is Oc to 4.6ghz with a CM Hyper 212 Evo. mobo is an Asrock 970 Extreme3 R2.0. purrs like a kitten.

 

edit: My bios settings looks like that: 

 

OC Mode : Manual

then another option will appear Overclock mode yadada: manual

my Cpu Frequency : 214

pce : stays at 100

 

spread spectrum : disabled

Cpu active core control : all cores

Amd turbo core: disabled

Amd power management: disabled

 

Multiplier voltage : manual

Cpu multiplier : 21.5 @ 4601mhz

cpu volt @1.4625

 

and leave the rest as it is.

Go to the ADVANCED page and cpu config

disabled everything except: Secure Virtual mode.

also, is my psu able to handle increased voltage?

will it handle en overclocked cpu and a better gpu?

my psu is CX600

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
18 hours ago, JonaChan said:

also, is my psu able to handle increased voltage?

will it handle en overclocked cpu and a better gpu?

my psu is CX600

Your PSU has a 12v rail and your motherboard steps that down to 1-1.5. Your power supply does about 10x the voltages you need.

Tip to those that are new on LTT forum- quote a post so that the person you are quoting gets a notification, otherwise they'll have no idea that you did. You can also use a tag such as @Ryoutarou97 (replace my username with anyone's. You should get a dropdown after you type the "@")to send a notification, but quoting is preferable.

 

Feel free to PM me about absolutely anything be it tech, math, literature, etc. I'll try my best to help. I'm currently looking for a cheap used build for around $25 to set up as a home server if anyone is selling.

 

If you are a native speaker please use proper English if you can. Punctuation, capitalization, and spelling are as important to making your message readable as proper night theme formatting is.

 

My build is fully operational, but won't be posted until after I get a GPU in it and the case arted up.

Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing CPUs, Motherboards, and Memory

×