Jump to content

Well if iflt has to boot programs that star up with windows off the boot drive that will slow it down. But if that is not happening such as having videos stored on the drive as long as there is 10 free gb it should be fine but too little space is bad for boot times yes

I have an Anet A8 as my project printer and a i3 MK3 for when I want things to work. 

 

I extrude my own filament and haven't saved a penny yet.

 

 

My PC:

Spoiler

CPU: Intel i7 8700k

Motherboard: MSI Z370-A Pro

RAM: G.Skill Ripjaws V (2x8GB) DDR4-3200

GPU: GTX 1070 Founders Edition (OC'd)

Storage: 2x 2TB Seagate 5400RPM, 128GB ADATA SSD

Power Supply: EVGA Supernova 750w  B2

Cooling: Noctua NH-D15. 3 Intake Fans, 2 Outtake

Case: Fractal Design Define R6

 

Link to post
Share on other sites

Assuming that disc is your boot drive, YES and it does it for both hard drives (spinning discs) and for SSD's although for different reasons. 

 

My rule of thumb is to have at least 10% of available disc space on my boot drives, but in reality I keep my booting ssd's usually with at least 30% free space. Anything below that and I take a look to my fil0es and programs to make some more space. If you do this you should be fine.

 

If your using an SSD also remember to over provision the ssd as required. Most SSDs come with a software that lets you tweak them, see SMART(diagnostic) numbers and even update firmware. I have Samsung and OCZ ssds and both have their own software. The software also ask you to reserve around 10% of space for over provisioning which helps speed up the ssd, failing do to this will hurt performance. Note that his separate from whatever free space you have on disk.

Link to post
Share on other sites

55 minutes ago, Termiux said:

Assuming that disc is your boot drive, YES and it does it for both hard drives (spinning discs) and for SSD's although for different reasons. 

 

My rule of thumb is to have at least 10% of available disc space on my boot drives, but in reality I keep my booting ssd's usually with at least 30% free space. Anything below that and I take a look to my fil0es and programs to make some more space. If you do this you should be fine.

 

If your using an SSD also remember to over provision the ssd as required. Most SSDs come with a software that lets you tweak them, see SMART(diagnostic) numbers and even update firmware. I have Samsung and OCZ ssds and both have their own software. The software also ask you to reserve around 10% of space for over provisioning which helps speed up the ssd, failing do to this will hurt performance. Note that his separate from whatever free space you have on disk.

I'm not really advanced in the pcmr. When you turn on your PC which files are loaded?

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×