Motherboard doesn't even boot up

[Skydiver]

This is the asus p9d-mv, I can't get anything to spin...  I even changed the power supply! Did I plug everything needed in? 

[Pepi28]

How are you trying to turn it on? Shortening the power button pins?

[d3sl91]

It looks like your Front Panel jack is shorted out?

[Skydiver]

Just now, Pepi28 said:

How are you trying to turn it on? Shortening the power button pins?

Yes, with a screw driver

[Skydiver]

2 minutes ago, d3sl91 said:

It looks like your Front Panel jack is shorted out?

How did that happen and what can I do about it? 

[Pepi28]

2 minutes ago, d3sl91 said:

It looks like your Front Panel jack is shorted out?

If that were the case, would the green LED still light up as it is the photo?

[Guest]

Which set of panel connectors are you using?

 

Also, have you tried plugging in the 4 Pin (Molex) connector?

[d3sl91]

33 minutes ago, Skydiver said:

How did that happen and what can I do about it? 

Take a picture of your front panel pins and post it. If they are shorted, just bend then back straight. 

 

34 minutes ago, Pepi28 said:

If that were the case, would the green LED still light up as it is the photo?

Depends on what is actually being shorted, but likely yes - the green LED is more or less a "the PSU is connected" type notification. 

[PyroBlast13]

DO NOT forget to connect the 24-pin, the 8-pin power plugs, and the 4-pin PWR3;

otherwise, the system will not boot up

I just got this from the manual for the board. Its The plug to the left of the 24 pin.

[Skydiver]

19 minutes ago, d3sl91 said:

Take a picture of your front panel pins and post it. If they are shorted, just bend then back straight. 

 

Depends on what is actually being shorted, but likely yes - the green LED is more or less a "the PSU is connected" type notification. 

Thanks for the help but the pins are straight, I even tried to use the connectors from the case without much luck

[Skydiver]

10 minutes ago, PyroBlast13 said:

DO NOT forget to connect the 24-pin, the 8-pin power plugs, and the 4-pin PWR3;

otherwise, the system will not boot up

I just got this from the manual for the board. Its The plug to the left of the 24 pin.

The molex one? 

[Skydiver]

28 minutes ago, PyroBlast13 said:

DO NOT forget to connect the 24-pin, the 8-pin power plugs, and the 4-pin PWR3;

otherwise, the system will not boot up

I just got this from the manual for the board. Its The plug to the left of the 24 pin.

Plugged it in, still nothing I'll send this motherboard back I guess, it must be dead!