Boot Loop - No Display

[aircrafttech]

Hi,

Having a lot of trouble with my new build. When I turn the system on, it powers on for 15 seconds,and then goes into a boot loop. No power to peripherals(tried all ports) or display output via HDMI.

 

Specs:

I5-6600k

Gigabyte h170n-wifi

8gb hyperx fury ddr4-2666

Silverstone Sg13 

MSI GTX 960 100ME

Corsair CS450M

 

Thanks for your help

[BiscuitMassacre]

Are the Motherboards CPU pins all there and undamaged? Sounds like something that happened to me before. 

[PooPipeBoy]

This is probably the video for you, if you've got a computer that's boot-looping.

 

 

[ZestyJalapeno]

Try booting with just the barebones.

[Sodak]

Is your RAM installed correctly?

When I put more ram in my PC I didn't do it correctly at first and it boot looped.

[Sors]

Take out the video card, connect your display to the integrated graphics and test if it boots.

 

Does the motherboard have a speaker? do you hear any beeps?

[aircrafttech]

Tried all above. Nothing. Thanks for the suggestions. Any ideas? Tried all ram slots, no RAM, different PSU, no CPU, with cpu, with/without GPU.  @Sors no, it doesnt have a speaker, might grab one from the store to see...

Should it beep if I have no RAM in as an error?

Edit: 5 long beeps. Can't find the beep error legend anywhere.

[Sors]

1 hour ago, aircrafttech said:

Tried all above. Nothing. Thanks for the suggestions. Any ideas? Tried all ram slots, no RAM, different PSU, no CPU, with cpu, with/without GPU.  @Sors no, it doesnt have a speaker, might grab one from the store to see...

Should it beep if I have no RAM in as an error?

Edit: 5 long beeps. Can't find the beep error legend anywhere.

http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816

 

It seems 5 beeps means a CPU error.

[aircrafttech]

What on earth could that mean? I have tried reseating it a few times and I know it works,  used it for 6 months in another build. Any ideas?  Thanks for your help BTW. 

4 hours ago, Sors said:

http://www.gigabyte.com/support-downloads/faq-page.aspx?fid=816

 

It seems 5 beeps means a CPU error.

 

[Sors]

6 hours ago, aircrafttech said:

What on earth could that mean? I have tried reseating it a few times and I know it works,  used it for 6 months in another build. Any ideas?  Thanks for your help BTW. 

 

Could be a bend pin in the CPU  socket, uneven pressure from the heat sink, or even a damaged motherboard.