Final check with Custom Loop

[Guest]

Alright, time for the final check to make sure everything will work. Exhibit A. The diagram (made with my lovely MS paint skills, note, I will be switching cases, power supplies and most likey, Chipsets in the time)

Now onto the parts to be used for said project

https://shop.ekwb.com/ek-tube-zmt-matte-black-15-9-9-5mm-3m-retail (1x Ek-Tube, matte black 15,9/9,5m) 

https://shop.ekwb.com/ek-acf-fitting-10-16mm-black-2 (8x WK-ACF 10/16mm Compression fittings)

https://shop.ekwb.com/ek-vardar-f4-120er-2200rpm (3x EK-Vardar F4 120ER) 

https://shop.ekwb.com/ek-coolstream-se-360-slim-triple (1x EK-CoolStream CE 360 Slim Triple)

https://shop.ekwb.com/ek-xres-140-revo-d5-pwm-incl-pump (1x EK-XRES 140 Revo D5 PWM  Including Pump)

https://shop.ekwb.com/ek-supremacy-evo-acetal-nickel-original-csq (1x EK-Supremacy Evo - Acetal+Nicke) 

This should all work correct? there shouldn't be any conflicts? (360mm Rad for GPU support later) 

[Stardar1]

Alright, time for the final check to make sure everything will work. Exhibit A. The diagram (made with my lovely MS paint skills, note, I will be switching cases, power supplies and most likey, Chipsets in the time)

Now onto the parts to be used for said project

https://shop.ekwb.com/ek-tube-zmt-matte-black-15-9-9-5mm-3m-retail (1x Ek-Tube, matte black 15,9/9,5m) 

https://shop.ekwb.com/ek-acf-fitting-10-16mm-black-2 (8x WK-ACF 10/16mm Compression fittings)

https://shop.ekwb.com/ek-vardar-f4-120er-2200rpm (3x EK-Vardar F4 120ER) 

https://shop.ekwb.com/ek-coolstream-ce-420-triple (1x EK-CoolStream CE 420 Triple)

https://shop.ekwb.com/ek-xres-140-revo-d5-pwm-incl-pump (1x EK-XRES 140 Revo D5 PWM  Including Pump)

https://shop.ekwb.com/ek-supremacy-evo-acetal-nickel-original-csq (1x EK-Supremacy Evo - Acetal+Nicke) 

This should all work correct? there shouldn't be any conflicts? (360mm Rad for GPU support later) 

Not my area of expertise, but could you not get a high quality AIO cooler and replace the fans with high pressure models?

The performance increase in using custom cannot be that much better, can it?

[TheGhzGuy]

Alright, time for the final check to make sure everything will work. Exhibit A. The diagram (made with my lovely MS paint skills, note, I will be switching cases, power supplies and most likey, Chipsets in the time)

Now onto the parts to be used for said project

https://shop.ekwb.com/ek-tube-zmt-matte-black-15-9-9-5mm-3m-retail (1x Ek-Tube, matte black 15,9/9,5m) 

https://shop.ekwb.com/ek-acf-fitting-10-16mm-black-2 (8x WK-ACF 10/16mm Compression fittings)

https://shop.ekwb.com/ek-vardar-f4-120er-2200rpm (3x EK-Vardar F4 120ER) 

https://shop.ekwb.com/ek-coolstream-ce-420-triple (1x EK-CoolStream CE 420 Triple)

https://shop.ekwb.com/ek-xres-140-revo-d5-pwm-incl-pump (1x EK-XRES 140 Revo D5 PWM  Including Pump)

https://shop.ekwb.com/ek-supremacy-evo-acetal-nickel-original-csq (1x EK-Supremacy Evo - Acetal+Nicke) 

This should all work correct? there shouldn't be any conflicts? (360mm Rad for GPU support later) 

Amazing MS Paint skills lol (I'm just trying to joke around)

Anyway, I think that should all work, but I'd wait for other people to look

[TheGhzGuy]

Not my area of expertise, but could you not get a high quality AIO cooler and replace the fans with high pressure models?

The performance increase in using custom cannot be that much better, can it?

Well they said they wanted to put the GPU in later, soooo

[Guest]

Not my area of expertise, but could you not get a high quality AIO cooler and replace the fans with high pressure models?

The performance increase in using custom cannot be that much better, can it?

it can infact be better, I personally wanna ditch my loud h100i, and take pride in not having an AIO anymore.

And I don't really wanna get off too easy with a whole watercooling kit either.

And again. Like I said, It can be better, but it really depends 

[W-L]

-SNIP-

 

That looks to be good but you have a 420mm rad selected and not a 360mm one, for the fans though go for the lower RPM ones if your wanting silence. 

[Guest]

That looks to be good but you have a 420mm rad selected and not a 360mm one, for the fans though go for the lower RPM ones if your wanting silence. 

Oops my bad, let me go fix that!

(thanks for telling me haha) 

[jcw150]

Alright, time for the final check to make sure everything will work. Exhibit A. The diagram (made with my lovely MS paint skills, note, I will be switching cases, power supplies and most likey, Chipsets in the time)

Now onto the parts to be used for said project

https://shop.ekwb.com/ek-tube-zmt-matte-black-15-9-9-5mm-3m-retail (1x Ek-Tube, matte black 15,9/9,5m) 

https://shop.ekwb.com/ek-acf-fitting-10-16mm-black-2 (8x WK-ACF 10/16mm Compression fittings)

https://shop.ekwb.com/ek-vardar-f4-120er-2200rpm (3x EK-Vardar F4 120ER) 

https://shop.ekwb.com/ek-coolstream-ce-420-triple (1x EK-CoolStream CE 420 Triple)

https://shop.ekwb.com/ek-xres-140-revo-d5-pwm-incl-pump (1x EK-XRES 140 Revo D5 PWM  Including Pump)

https://shop.ekwb.com/ek-supremacy-evo-acetal-nickel-original-csq (1x EK-Supremacy Evo - Acetal+Nicke) 

This should all work correct? there shouldn't be any conflicts? (360mm Rad for GPU support later) 

Looks good but you do have an extra 2 compression fittings and no fuild

[xgn]

Looks good  The res is 190mm in height so make sure there is no conflicts.

[Guest]

Looks good but you do have an extra 2 compression fittings and no fuild

I'll buy the fluid at my local store along with Anti-Bacterial stuffs, and I want them for GPU (Later) and just to have them if anything goes wrong

[Guest]

Looks good  The res is 190mm in height so make sure there is no conflicts.

oh don't worry about that, I'll just stick em on top of my drive cage, if i really need to drop one

[xgn]

oh don't worry about that, I'll just stick em on top of my drive cage, if i really need to drop one

I recommend you measure that before you buy or you can get the smaller version which is the same as im using.

[Guest]

I recommend you measure that before you buy or you can get the smaller version which is the same as im using.

I'll be sure to measure it just in case, because I just saw this $100 in tax

It'll be another 4 monthish after I get a PSU and case to even consider buying the pump