Sistem shut down after POST

[shark2oo6]

Hello,

 

I have the following issue with my new sistem.

When I press the power button on my case, the sistem start up, run POST, then it shut down by itself. If I press the power button again, it's starting up and everything run like normal. This happens every single time. do you have any ideeas?

 

I3 6100 3.7 GHz

Asus H110M-A

Asus GTX 750 Ti PH 2GB DDR5 128Bit

Crucial DDR 4 8GB 2133MHz Dual Channel 

HDD 7200 RPM 500GB

PSU FSP HEXA+ 400

[Cobiee]

Try with one stick of ram, Then the other if it posts with one and not the other it's a bad stick.

Also check all your power cables are plugged in properly

[BlueChinchillaEatingDorito]

Hello,

 

I have the following issue with my new sistem.

When I press the power button on my case, the sistem start up, run POST, then it shut down by itself. If I press the power button again, it's starting up and everything run like normal. This happens every single time. do you have any ideeas?

 

I3 6100 3.7 GHz

Asus H110M-A

Asus GTX 750 Ti PH 2GB DDR5 128Bit

Crucial DDR 4 8GB 2133MHz Dual Channel 

HDD 7200 RPM 500GB

PSU FSP HEXA+ 400

 

Clear CMOS first and see if that solves the issue. And are you getting any error beeps, codes, or anything on screen?

[Geospan1]

You could try booting the system without the graphics card.it could be a power issue.How old is your psu?

EDIT:And have you up grated any piece of hardware recently?

[shark2oo6]

@iCobie  I've tried with one stick RAM, same issue on both ports and RAM sticks

@BlueChinchillaEatingDorito There is no beep, no error, nothing

@Geospan1 I've tried with onboard graphics card, same issue. All parts were bought last week, the only thing that I oldish in the HHD, 4-5 months since I bought that.

[Geospan1]

@iCobie  I've tried with one stick RAM, same issue on both ports and RAM sticks

@BlueChinchillaEatingDorito There is no beep, no error, nothing

@Geospan1 I've tried with onboard graphics card, same issue. All parts were bought last week, the only thing that I oldish in the HHD, 4-5 months since I bought that.

Was the system ever operational?

[shark2oo6]

Yes, if after it shuts down I start it again, it runs with no problem, loads the OS, runs apps, etc.

[Geospan1]

Yes, if after it shuts down I start it again, it runs with no problem, loads the OS, runs apps, etc.

Then the best guess would be the psu,you could try using another one,if one is available

[Geospan1]

Wait,1 more question, where is the power cable connected to?if it is connected to a power strip,try connecting it to a wall plug by it self.

[shark2oo6]

What I don't understand is why after it shuts down, if I start it again, every thing works normal..... :angry:  Basically, the system is working after 2 start ups :lol:

[shark2oo6]

It's the same issue with or without a power strip.....

[Geospan1]

What I don't understand is why after it shuts down, if I start it again, every thing works normal..... :angry:  Basically, the system is working after 2 start ups :lol:

I had the same problem once because I had like 5 devices to the same wall plug (which is a no no)

[Geospan1]

It's the same issue with or without a power strip.....

I see,last idea.Try another wall plug because in the old days electricians were sh*t and connected almost every plug in series.

Edit:I know it's trouble but worth checking out

[shark2oo6]

@Geospan1 I've tried another wall plug.... same issue...

[Geospan1]

@Geospan1 I've tried another wall plug.... same issue...

sorry,i'm out of ideas,if you don't find a solution on the internet you sould consider to hire a technician.Good luck.

[shark2oo6]

Finally I had the time to run some test, everything was good. So I installed Win 10 again on the system and every thing is ok now. My best guest is that the hdd's mbr was damaged somehow.