xmp problems

[Alexalex1]

when I enable XMP and try to boot into windows 10, my pc crashes. when xmp is off, everything is fine. whats wrong with the xmp.

[ProKoN]

one or two things is happening

 

a- xmp values are not supplying your ram with enough voltage

 

b-xmp also enables intel turbo boost on most boards. your cpu may not be stable with turbo boost active and stock voltage....but this is not likely at stock settings

 

 

xmp is a suggestion not a specification

[Alexalex1]

one or two things is happening

 

a- xmp values are not supplying your ram with enough voltage

 

b-xmp also enables intel turbo boost on most boards. your cpu may not be stable with turbo boost active and stock voltage....but this is not likely at stock settings

 

 

xmp is a suggestion not a specification

should i up the voltage of the ram when xmp is on and check for intel turbo boost

[ProKoN]

yep i would increase voltage in .05 increments   1.25 1.30 1.35 1.40 1.45

 

I would stop at 1.45V. most kits need 1.35V to run

 

just disable turbo boost to rule that out

[Alexalex1]

yep i would increase voltage in .05 increments   1.25 1.30 1.35 1.40 1.45

 

I would stop at 1.45V. most kits need 1.35V to run

 

just disable turbo boost to rule that out

i will give this a try

[Alexalex1]

I looked at it and it was set to 1.2 and I put it to 1.35 and it works