Jump to content

Hi guys, I saw Linus talk about nvidia surround @

 

However, he never goes into anything about what kinds of monitors to use, and what is that stand they are using in the video?  What monitors are they even using?

 

I have two 970's, and want to get started with this, but I want to make sure to buy 3 monitors that will give a decent experience without breaking the bank.

 

Considering the three display ports, one hdmi, and one dvi, it'd be amazing to get three monitors with displayport inputs, around 24", and as thin a bezel as possible.  Also, is greater than 60Hz worth it with that sort of setup?  Any recommendations?

Link to comment
https://linustechtips.com/topic/436722-monitors-for-nvidia-surround/
Share on other sites

Link to post
Share on other sites

Hi guys, I saw Linus talk about nvidia surround @

 

However, he never goes into anything about what kinds of monitors to use, and what is that stand they are using in the video?  What monitors are they even using?

 

I have two 970's, and want to get started with this, but I want to make sure to buy 3 monitors that will give a decent experience without breaking the bank.

 

Considering the three display ports, one hdmi, and one dvi, it'd be amazing to get three monitors with displayport inputs, around 24", and as thin a bezel as possible.  Also, is greater than 60Hz worth it with that sort of setup?  Any recommendations?

they are benq monitors

potato.

 
 

 

Link to post
Share on other sites

Dell U2414H is probably the best for this kind of setup. IPS, thin bezels and DP connections. 

 

Above 60Hz is nice, if your system can run it above 60FPS. With surround and SLI 970s, it's unlikely to be getting much over 60FPS with high settings. 

 

As for a mount, Ergotron is the best place to look, though they are expensive. Take a look at Duronic as well, and if you're in the UK, Novatech have some good triple mounts. 

 

Dell U2414H in surround:

 

577371IMG0148.jpg

Link to post
Share on other sites

they are benq monitors

BenQ make a lot of monitors... Reading the brand on the monitors doesn't really help. 

 

Unfortunately, all of BenQ's monitors look very similar, so it's hard to tell the model from just looking at them. 

Link to post
Share on other sites

Hi guys, I saw Linus talk about nvidia surround @

 

However, he never goes into anything about what kinds of monitors to use, and what is that stand they are using in the video?  What monitors are they even using?

 

I have two 970's, and want to get started with this, but I want to make sure to buy 3 monitors that will give a decent experience without breaking the bank.

 

Considering the three display ports, one hdmi, and one dvi, it'd be amazing to get three monitors with displayport inputs, around 24", and as thin a bezel as possible.  Also, is greater than 60Hz worth it with that sort of setup?  Any recommendations?

http://pcpartpicker.com/part/asus-monitor-vg248qe 144hz

 

http://pcpartpicker.com/part/asus-monitor-mx259h 60hz IPS

"Sulit" (adj.) something that is worth it

i7 8700K 4.8Ghz delidded / Corsair H100i V2 / Asus Strix Z370-F / G.Skill Trident Z RGB 16GB 3200 / EVGA GTX 1080Ti FTW3 / ASUS ROG SWIFT PG279Q

Samsung 850 EVO 500GB & 250GB - Crucial MX300 M.2 525GB / Fractal Design Define S / Corsair K70 MX Reds / Logitech G502 / Beyerdynamic DT770 250Ohm

SMSL SD793II AMP/DAC - Schiit Magni 3 / PCPP

Old Rig

i5 2500k 4.5Ghz | Gigabyte Z68XP-UD3P | Zotac GTX 980 AMP! Extreme | Crucial Ballistix Tactical 16GB 1866MHz

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×