Tubing

[Janeyadonnah]

I will be building a complete watercooled system and of course I'll need some tubing.

 

Planned are fittings with 13/10mm (ID 3/8" OD 1/2"),as it is the most common one;  so the tubing should be compatible with that.

 

Also it should bend well and shouldn't kink when doing a tight bend.

Furthermore it should be very clear and shouldn't stain over extended periods of time.

It also should'nt be that expensive.

 

Please post me your suggestions!

[,,,,,,,,,,,,,,,,,,,,,,,,,,]

Cheap + quality tubing that wont stain = doesn't work like that sunny boy

[Janeyadonnah]

Cheap + quality tubing that wont stain = doesn't work like that sunny boy

 

Anything you could recommend?

 

[,,,,,,,,,,,,,,,,,,,,,,,,,,]

Anything you could recommend?

 

 

Hardline tubing won't stain + is usually cheap just takes a lot of skill. Honestly I don't know much about soft tubing since I went straight to rigid-tubing. Take a look at primochill and ek tubing. Probably your best bet.

[Altecice]

Anything you could recommend?

 

 

primochill primoflex advanced tubing is arguably the best tubing you can get, It wont collapse in on its self while bending and wont stain. But as said above, nothing about liquid cooling is cheap.