Updating rig

[Lazybones]

So I just recently built a rig with the Asus Rampage V Extreme Mobo, turned out the mobo' was faulty so i got it changed, i then returned my 980s and got Titan X's instead which I am now planning on removing the fans on and installing waterblocks on and the same goes for the CPU.

My other thing that i am planning to do is to install a preassure censor which is going to work as a failsafe, if the pressure reaches a certain level due to leaks or something along those lines I would like to have a drainage leading the water into a drainage tank.

 

All this is due to me wanting and crawing more, allooooot more.....

 

Thought on this?

 

My components are:

Case: Cooler Master Cosmos 2

Motherboard: Asus X99 Deluxe

CPU: Intel i7 5930k

RAM: 32 gigs of Crucial Ballistic Sport

GPU: EVGA Superclocked Titan X in 2-way SLI

PSU: Corsair RM1000 80 plus gold

HDD 1: Samsung 850 PRO

HDD 2: WD Black 1TB

 

My thoughts as far as cooling is to have a 360 radiator mounted in the bottom of the case and a 360 radiator mounted in the top with Noctua PPC fans.

Waterblocks for both CPU and GPU.

[Sam Z Man]

That pressure sensor failsafe sounds like a great idea, but make sure it also turns off the PC, but that's a stroke of genius right there.

[Lazybones]

That pressure sensor failsafe sounds like a great idea, but make sure it also turns off the PC, but that's a stroke of genius right there.

 

A friend of mine works as a robot engineer, it's hjis idea and i think it will be godamn amazing. Becuase that pretty much renders the whole things pretty damn safe:)

[Sam Z Man]

Why do you have 5930K and only dual sli when a 5820K would suffice. 

[Captain_WD]

So I just recently built a rig with the Asus Rampage V Extreme Mobo, turned out the mobo' was faulty so i got it changed, i then returned my 980s and got Titan X's instead which I am now planning on removing the fans on and installing waterblocks on and the same goes for the CPU.

My other thing that i am planning to do is to install a preassure censor which is going to work as a failsafe, if the pressure reaches a certain level due to leaks or something along those lines I would like to have a drainage leading the water into a drainage tank.

 

All this is due to me wanting and crawing more, allooooot more.....

 

Thought on this?

 

My components are:

Case: Cooler Master Cosmos 2

Motherboard: Asus X99 Deluxe

CPU: Intel i7 5930k

RAM: 32 gigs of Crucial Ballistic Sport

GPU: EVGA Superclocked Titan X in 2-way SLI

PSU: Corsair RM1000 80 plus gold

HDD 1: Samsung 850 PRO

HDD 2: WD Black 1TB

 

My thoughts as far as cooling is to have a 360 radiator mounted in the bottom of the case and a 360 radiator mounted in the top with Noctua PPC fans.

Waterblocks for both CPU and GPU.

 

Hey Lazybones,

 

You have a pretty beefy build there with a lot of potential. The idea of getting a pressure sensor is great and I would love to see it happen.

I could suggest to consider adding some redundancy/backups to your data. WD Black is a great drive and should serve you well, but in case of failure you should keep backups on an external drive that is not connected to your system. You can also consider a RAID setup.

 

Captain_WD.

[Lazybones]

 

Hey Lazybones,

 

You have a pretty beefy build there with a lot of potential. The idea of getting a pressure sensor is great and I would love to see it happen.

I could suggest to consider adding some redundancy/backups to your data. WD Black is a great drive and should serve you well, but in case of failure you should keep backups on an external drive that is not connected to your system. You can also consider a RAID setup.

 

Captain_WD.

 

Thats another project to be honest:)

My case setup will have to change significantly to suite the watercooling solution.

 

 

Why do you have 5930K and only dual sli when a 5820K would suffice. 

I am getting a third Titan X in just a few months so it will have its use:)