Build help

[Cucuzza64]

So I believe I finished puting everything in my new pc and wiring everything but when I boot it up it seems like everything turns on besides a fan that came the case on the back. I'm new too building so I could have messed something up any things I should check without taking it apart cause I would have to kill myself if I had too(jokeing) this took me forever

[misthosg]

So I believe I finished puting everything in my new pc and wiring everything but when I boot it up it seems like everything turns on besides a fan that came the case on the back. I'm new too building so I could have messed something up any things I should check without taking it apart cause I would have to kill myself if I had too(jokeing) this took me forever

Did you make sure that the included cables with that came with the case are plugged into the psu?

[Cucuzza64]

Did you make sure that the included cables with that came with the case are plugged into the psu?

srry what cables I used the cables that came with the psu which I put into my motherboard if that's what ur asking

[harbo99]

srry what cables I used the cables that came with the psu which I put into my motherboard if that's what ur asking

have you connected the cable from the fan to the fan header on the motherboard?

[Cucuzza64]

have you connected the cable from the fan to the fan header on the motherboard?

The fan that isn't working was already pluged in in the back of the case cause it came with it and also if the psu fan in not moving dose that mean it's not working although I'm getting power cause of the led lights and cooler fans are working

[harbo99]

The fan that isn't working was already pluged in in the back of the case cause it came with it and also if the psu fan in not moving dose that mean it's not working although I'm getting power cause of the led lights and cooler fans are working

that the psu fan isn't spinning doesn't mean it is broken, some pus's simply doesn't turn on their fan until it is under load. 

 

the fan you are talking about should have a wire the ends with a convoker, doesn't it have that?

[Cucuzza64]

that the psu fan isn't spinning doesn't mean it is broken, some pus's simply doesn't turn on their fan until it is under load.

the fan you are talking about should have a wire the ends with a convoker, doesn't it have that?

srry I still don't understand what ur talking about is the fan came bolted on and pluged in to a thing behind the case were

most wires are

[harbo99]

srry I still don't understand what ur talking about is the fan came bolted on and pluged in to a thing behind the case were

most wires are

 

alright let me just try and figure this out... what case do you have?

[Cucuzza64]

alright let me just try and figure this out... what case do you have?

I have a enthoo luxe

[harbo99]

I have a enthoo luxe

alright so if your fan is plugged in to the little box in the back of the case (where you can plug in 11 other fans) from that box there should be some sort of cable that is not like the one's of the fans you have plugged into it, this goes into your motherboard.

 

Do you understand?

[harbo99]

I have a enthoo luxe

 

You should plug all of your fans into this box, and then plug the end of the marked plug into the motherboard

[Cucuzza64]

You should plug all of your fans into this box, and then plug the end of the marked plug into the motherboard

ok then we're do I plug that into my motherboard its a ASUS rampage V extreme

[harbo99]

ok then we're do I plug that into my motherboard its a ASUS rampage V extreme

 

I think you should plug it into one of the optional fan headders i marked (Opt_Fan1 and Opt-Fan 3) just one of them won't matter which one

 

after doing this there should be a cable from your power supply you can plug into the marked e-sata connector. After this your fans should be up and running 

 

if you have any doubts after this i would like a picture of how it looks in your specific case.

[harbo99]

I think you should plug it into one of the optional fan headders i marked (Opt_Fan1 and Opt-Fan 3) 

 

after doing this there should be a cable from your power supply you can plug into the marked e-sata connector. After this your fans should be up and running 

 

if you have any doubts after this i would like a picture of how it looks in your specific case.

[Cucuzza64]

I think you should plug it into one of the optional fan headders i marked (Opt_Fan1 and Opt-Fan 3) just one of them won't matter which one

after doing this there should be a cable from your power supply you can plug into the marked e-sata connector. After this your fans should be up and running

if you have any doubts after this i would like a picture of how it looks in your specific case.

that's a different motherboard so idk were to put it still I put it in the cpu fan spot in the top righ but it didn't work

[Cucuzza64]

that's a different motherboard so idk were to put it still I put it in the cpu fan spot in the top righ but it didn't work

NVM on that I got it but I still don't get a display on my screen that kinda what this whole thing was about

[Cucuzza64]

I think you should plug it into one of the optional fan headders i marked (Opt_Fan1 and Opt-Fan 3)

after doing this there should be a cable from your power supply you can plug into the marked e-sata connector. After this your fans should be up and running

if you have any doubts after this i would like a picture of how it looks in your specific case.

NVM on that I got it but I still don't get a display on my screen that kinda what this whole thing was about

[harbo99]

Have you plugged the hdmi cable into the gpu hdmi enterence and not the one in the motherboard?

[Cucuzza64]

Have you plugged the hdmi cable into the gpu hdmi enterence and not the one in the motherboard?

Ya I tried HDmi and dvi and they both don't get a display so idk what to do what Do u think It is

[Cucuzza64]

Have you plugged the hdmi cable into the gpu hdmi enterence and not the one in the motherboard?

of this helps this is what it looks like IMG_0935.JPG

[harbo99]

of this helps this is what it looks like IMG_0935.JPG

you didn't send a picture only named the file, can't see it