Jump to content

Airflow vs Static Pressure?

cheeze_tartz
By cheeze_tartz
in Cooling
 Share
Posted

I am about to order a Corsair Spec-01 case that comes with 1 fan (I am going to use it as an exhaust). I am also planning to get 2 additional fans for intakes. Should I get Airflow or Static Pressure?

01101110 01101111 00100000 01101111 01101110 01100101 00100000 01101100 01101111 01110110 01100101 01110011 00100000 01111001 01101111 01110101


Main Rig: i7-4790K | Corsair H100i | Asus Z97 | 16GB Ripjaws | 4TB WD Black/512GB SSD | x2 R9 290x | NZXT H440 | HX1000i | 6 Noctuas   [spoiler=SILENT BUILD] Silent build: i5-4460, Be Quiet! Pure Rock, Asrock H97, 8GB HyperX, Samsung 850 Evo 500gb, MSI GTX 970, Be Quiet! Silent Base 800, EVGA Supernova GS 650w 

AMD CPU's. [spoiler=] thats right m8 get 420 no scoped 
Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Airflow, static pressure is better for heatsinks/radiators.

Ok, thanks

01101110 01101111 00100000 01101111 01101110 01100101 00100000 01101100 01101111 01110110 01100101 01110011 00100000 01111001 01101111 01110101


Main Rig: i7-4790K | Corsair H100i | Asus Z97 | 16GB Ripjaws | 4TB WD Black/512GB SSD | x2 R9 290x | NZXT H440 | HX1000i | 6 Noctuas   [spoiler=SILENT BUILD] Silent build: i5-4460, Be Quiet! Pure Rock, Asrock H97, 8GB HyperX, Samsung 850 Evo 500gb, MSI GTX 970, Be Quiet! Silent Base 800, EVGA Supernova GS 650w 

AMD CPU's. [spoiler=] thats right m8 get 420 no scoped 
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

Ok, thanks

I would suggest static pressure because of the front intake (bottom one) is blocked by mesh and hard drive cages. The top exhausts are blocked by dust filters too. Just use the stock fan at the end as exhaust

The BBQ: i7-4770 / 212x / Tri-X R9 290x 1075/1400 / MSI H87-G43 GAMING / EVGA G2 850W / Corsair Spec 03 / Samsung 840 EVO 250gb SSD / Toshiba 2TB HDD / 8gb Kingston DDR3 1600mhz

Peripherals: G710+ / G502 / Bose Companion 2 Series III / Audio Technica ATH-M40x / Sound Magic E50

Monitors: Dell U2414H 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

I would suggest static pressure because of the front intake (bottom one) is blocked by mesh and hard drive cages. The top exhausts are blocked by dust filters too. Just use the stock fan at the end as exhaust

I am already using the stock fan as an exhaust. Since the bottom intake is blocked by the hard drive cage, should I use a Static Pressure on the bottom and an Airflow on the top?

01101110 01101111 00100000 01101111 01101110 01100101 00100000 01101100 01101111 01110110 01100101 01110011 00100000 01111001 01101111 01110101


Main Rig: i7-4790K | Corsair H100i | Asus Z97 | 16GB Ripjaws | 4TB WD Black/512GB SSD | x2 R9 290x | NZXT H440 | HX1000i | 6 Noctuas   [spoiler=SILENT BUILD] Silent build: i5-4460, Be Quiet! Pure Rock, Asrock H97, 8GB HyperX, Samsung 850 Evo 500gb, MSI GTX 970, Be Quiet! Silent Base 800, EVGA Supernova GS 650w 

AMD CPU's. [spoiler=] thats right m8 get 420 no scoped 
Link to comment
Share on other sites
Link to post
Share on other sites
Posted

I am already using the stock fan as an exhaust. Since the bottom intake is blocked by the hard drive cage, should I use a Static Pressure on the bottom and an Airflow on the top?

Personally i think you should always use static pressure fans if there is anything in the way. For this case since there is a dust filter on top (for spec 01) you should go with static pressure for top too. My suggestion would be to set up your chasis fans like this to maintain positive pressure and control your fans with software so the exhaust fans only spin up during load

 

Spec01-8.jpg

The BBQ: i7-4770 / 212x / Tri-X R9 290x 1075/1400 / MSI H87-G43 GAMING / EVGA G2 850W / Corsair Spec 03 / Samsung 840 EVO 250gb SSD / Toshiba 2TB HDD / 8gb Kingston DDR3 1600mhz

Peripherals: G710+ / G502 / Bose Companion 2 Series III / Audio Technica ATH-M40x / Sound Magic E50

Monitors: Dell U2414H 

Link to comment
Share on other sites
Link to post
Share on other sites
Posted
  • Author

Personally i think you should always use static pressure fans if there is anything in the way. For this case since there is a dust filter on top (for spec 01) you should go with static pressure for top too. My suggestion would be to set up your chasis fans like this to maintain positive pressure and control your fans with software so the exhaust fans only spin up during load

 

Spec01-8.jpg

Ok thanks, i'll go with static pressure

01101110 01101111 00100000 01101111 01101110 01100101 00100000 01101100 01101111 01110110 01100101 01110011 00100000 01111001 01101111 01110101


Main Rig: i7-4790K | Corsair H100i | Asus Z97 | 16GB Ripjaws | 4TB WD Black/512GB SSD | x2 R9 290x | NZXT H440 | HX1000i | 6 Noctuas   [spoiler=SILENT BUILD] Silent build: i5-4460, Be Quiet! Pure Rock, Asrock H97, 8GB HyperX, Samsung 850 Evo 500gb, MSI GTX 970, Be Quiet! Silent Base 800, EVGA Supernova GS 650w 

AMD CPU's. [spoiler=] thats right m8 get 420 no scoped 
Link to comment
Share on other sites
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Cooling

×