Corsair HG10 help

[Kyuubixchidori]

Hey everyone! so planning out my next build, and was looking at 290s. well they run hot as hell, and are loud. and my next system I want to be dead quite, or near dead quite.

 

now, its a cheapish build. Im spending about 500 with some old parts(hard drive+ram) 

 

basically, keeping it cheap and want it quite. so used AIO for the graphics card. so my question is,

 

will the H220 fit on the corsair HG10? what blocks will fit with this? or should I go nxzt karken I believe? I want to go HG10 because its meant for the card. and its hard to find what will/not work with it. 

 

or any other suggestions would be gratiful. like used watercooling. Blocks for cards are just expensive though. 

 

 

any help would be appericated!

[Necrodead]

http://support.nzxt.com/hc/en-us/articles/202479944-What-is-the-G10-compatible-with-

 

Hard to find? And no the H220 from swiftech will not work.

I would also recommend cooling the VRM and VRAM with heatsinks. They make some for this exact purpose, you would need 2 packs of 8 for all 16 VRAM chips and the one for the VRM.

http://www.newegg.ca/Product/Product.aspx?Item=N82E16835426042&cm_re=r9_290-_-35-426-042-_-Product

http://www.newegg.ca/Product/Product.aspx?Item=N82E16835708009&cm_re=enzotech-_-35-708-009-_-Product 

[Kyuubixchidori]

http://support.nzxt.com/hc/en-us/articles/202479944-What-is-the-G10-compatible-with-

 

Hard to find? And no the H220 from swiftech will not work.

I would also recommend cooling the VRM and VRAM with heatsinks. They make some for this exact purpose, you would need 2 packs of 8 for all 16 VRAM chips and the one for the VRM.

http://www.newegg.ca/Product/Product.aspx?Item=N82E16835426042&cm_re=r9_290-_-35-426-042-_-Product

http://www.newegg.ca/Product/Product.aspx?Item=N82E16835708009&cm_re=enzotech-_-35-708-009-_-Product 

http://www.corsair.com/en-us/hydro-series-hg10-a1-gpu-liquid-cooling-bracket

 

wanted to use that HG10 from corsair, not the NZXT bracket. I heard somewhere that all blocks based on a certain manufacturer work, but cant remember which

[Necrodead]

http://www.corsair.com/en-us/hydro-series-hg10-a1-gpu-liquid-cooling-bracket

 

wanted to use that HG10 from corsair, not the NZXT bracket. I heard somewhere that all blocks based on a certain manufacturer work, but cant remember which

Sorry! Its called the G10 so I got confused, didn't know corsair called theirs the HG10, lol. Anything that looks like this should work, its the Asetek standard mounting bracket.