radiator mounting

[CobalTicz]

Probably a pretty obvious answer but when mounting my radiator for it to fit I could only use the screw holes on half of it so my question is, is it fine using only half the mounting screws. It's a an h100i

I'll probably respond to any answers tomorrow

[Necrodead]

You really only need 2 screws to hold anything in place, but I would reccomend at least 3. If you can get one on each corner you are golden, no need to put 8 in at all.

[CobalTicz]

You really only need 2 screws to hold anything in place, but I would reccomend at least 3. If you can get one on each corner you are golden, no need to put 8 in at all.

I was only able to get one side of the screws in because for it to fit I needed to shift it over so i have all screws in but on one side only.    It's also not hanging it's on the top mount of my case so its laying on top ( not being suspended by the screws)