RedbaK - By Modzy

[Modzy]

This is my personal gaming rig. Mostly used for sim-racing. See signature for specs.

Cooling:
2x Alphacool DC-LT Ceramic 12v Pumps (@6.5v)
Alphacool Duel DC-LT Single 5.25" Reservoir
Phobya Xtreme 200mm Radiator (front intake mounted)
XSPC CPU Block
EK Ekoolant EVO Clear Premix + Biocide/silver coil
Bitspower 1/2" Shining Silver fittings
Bitspower Temperature Sensor
PrimoChill 1/2" LT Advanced Tubing White

Bitfenix 230mm Red LED Fan - On Rad Primary Intake
Corsair 200mm White LED Fan - In Roof Primary Out-take
Enermax 120mm Cluster White LED Fan - Rear Top Out-take
Phobya 120mm Static Pressure Red LED Fan - Rear Lower Out-take

 

 

[Guest]

ocool

[Phorlorn]

Nice colour scheme ^.^

[RJSX1]

Case?

[CamzoUK]

Case?

Looks like an Aerocool Xpredator X3.

[RJSX1]

Looks like an Aerocool Xpredator X3.

That was quick, thanks!

[CamzoUK]

That was quick, thanks!

No Problem

[SoftenButterCream]

How much did the water cooling cost?

[Modzy]

Case is Aerocool Xpredator Cube (matx/itx case)



 

[Modzy]

Here are some photos of the build process. I have since these photos dremeled out that front grill so the 230mm front fan isn't obstructed at all. 

Im also going to be adding in a 2nd radiator + GPU waterblock very soon, so ill add some more photos when I do that. Im really loving this tiny case. been a good challenge fitting everything in.

 

[Modzy]

How much did the water cooling cost?

It all came out of my old build which had even more parts but for the parts used here. It would be between $300-$350AUD including all fittings. But I had originally spent around $700 on the watercooling parts for my old build. Once I add my new waterblock and another radiator it will be around $500 for whats in the case.

[kkpatel87]

This is my personal gaming rig. Mostly used for sim-racing. See signature for specs.

Cooling:

2x Alphacool DC-LT Ceramic 12v Pumps (@6.5v)

Alphacool Duel DC-LT Single 5.25" Reservoir

Phobya Xtreme 200mm Radiator (front intake mounted)

XSPC CPU Block

EK Ekoolant EVO Clear Premix + Biocide/silver coil

Bitspower 1/2" Shining Silver fittings

Bitspower Temperature Sensor

PrimoChill 1/2" LT Advanced Tubing White

Bitfenix 230mm Red LED Fan - On Rad Primary Intake

Corsair 200mm White LED Fan - In Roof Primary Out-take

Enermax 120mm Cluster White LED Fan - Rear Top Out-take

Phobya 120mm Static Pressure Red LED Fan - Rear Lower Out-take

 

Wiring is a bit messy. Might want to spend some time and clean it up. Otherwise, really solid build!

[Modzy]

Yes its not finished yet. Once i do the GPU block i'll be going over all the cables. but the case is very limited for room so ill have to get sneaky hiding them i think.

[8uhbbhu8]

Just wondering, is you signature (this-> Intel i5 2500K @5.252Ghz) a troll or did you actually get it to this clock speed? And is it under water or Liquid Nitro?