Jump to content

Issues with Canon Wireless Printer Setup

Wheelzz
By Wheelzz
in Networking
 Share
Posted

Hello,

 

I am trying to setup my Canon Pixma MG3520 as a wireless printer to no avail.

 

My Router is the Cisco DPC3825 included with my modem/router combo unit from Shaw (I'm well aware that it's pretty terrible and that I really should purchase a new router to run in bridge mode).

 

I have tried both in wireless mode (by holding down the wifi button on the router until it flashes when prompted by the driver install, as well as via network USB to my router and selecting the appropriate option in the driver installation menu. Both methods result in the printer not being detection.

 

The system I am using is running Windows 7 64-bit and I have used the correct driver download from the Canon US site.

 

All help is greatly appreciated!

 

 

PC: Ryzen 5 2600 // 16 GB Corsair 3200 // MSI RX 580 8 GB // 500 GB WD Blue M.2 (sata) // Silverstone Raven RVZ03B // Fedora 33

LAPTOP: i7 5700HQ // 16 GB Kingston 1866 // GTX 970M // 250 GB Samsung 850 EVO M.2 // 1 TB HDD // Windows 10

ETC: (2) Dell U2515H (2560x1440) // Corsair K63 // Logitech G603 // FiiO E10 // Beyerdynamic DT 770 PRO (250 ohm) // Audio Technica ATH-M60x

 

Link to comment
https://linustechtips.com/topic/287707-issues-with-canon-wireless-printer-setup/
Share on other sites
Link to post
Share on other sites
Posted

Often doing the initial setup over USB, then switching the printer to wireless is a solid way to go. 

CPU: i5 4670k • Cooler: Corsair H100i • Motherboard: MSI Z87 MPOWER • RAM: Crucial Ballistix Elite 2x 8GB • Storage: Samsung 840 250GB SSD, 2x WD Red 3TB • GPU: EVGA GTX 780 3GB • PSU: Corsair RM750W • Case: Corsair 750D • Mouse: Razer Naga 2012 (I actually use the thing for productivity/media buttons) • Keyboard: Ducky Shine 3 w/ Browns - Green LED • Monitor: Asus PB278Q 27" 2560 x 1440, ASUS PB238Q 23" 1920x1080 • Lighting: 2m NZXT Sleeved Blue LED Strip • pcpartpicker.com/p/3cHfZ

 

Link to post
Share on other sites
Posted
  • Author

Often doing the initial setup over USB, then switching the printer to wireless is a solid way to go. 

 

I've just realized I may have had a huge brain fart. My PC is connected by Ethernet via a powerline adapter. Although, this should still work when the printer is connected via USB to the router, right?

PC: Ryzen 5 2600 // 16 GB Corsair 3200 // MSI RX 580 8 GB // 500 GB WD Blue M.2 (sata) // Silverstone Raven RVZ03B // Fedora 33

LAPTOP: i7 5700HQ // 16 GB Kingston 1866 // GTX 970M // 250 GB Samsung 850 EVO M.2 // 1 TB HDD // Windows 10

ETC: (2) Dell U2515H (2560x1440) // Corsair K63 // Logitech G603 // FiiO E10 // Beyerdynamic DT 770 PRO (250 ohm) // Audio Technica ATH-M60x

 

Link to post
Share on other sites
Posted

*Should* being the optimal word there. I'd still suggest a USB from the printer directly into your computer for setup.

CPU: i5 4670k • Cooler: Corsair H100i • Motherboard: MSI Z87 MPOWER • RAM: Crucial Ballistix Elite 2x 8GB • Storage: Samsung 840 250GB SSD, 2x WD Red 3TB • GPU: EVGA GTX 780 3GB • PSU: Corsair RM750W • Case: Corsair 750D • Mouse: Razer Naga 2012 (I actually use the thing for productivity/media buttons) • Keyboard: Ducky Shine 3 w/ Browns - Green LED • Monitor: Asus PB278Q 27" 2560 x 1440, ASUS PB238Q 23" 1920x1080 • Lighting: 2m NZXT Sleeved Blue LED Strip • pcpartpicker.com/p/3cHfZ

 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing Networking

×