Debug LED 60 error

SimpleLeonard · June 15, 2013

I recently build myself a new PC [specs: Intel i7 2600, asus maximus iv extreme, msi lightning r7970, kingston hyperX 1600mhz 2x4 gb ramkit, ocz fatality campion 1000w psu] Everytime I start my PC everything seems to work, but I don't get a post "beep" and nothing shows up on my screen! The only thing I noticed is the debug LED shows the number 60 meaning "DXE core is started". But after restarting a couple of times, the system boots normaly and everything seems to be working fine.

And sugestions?

Thanks.

BroKenFingers · June 16, 2013

Had a look around and some folks had found that their RAM caused this type of error. You might want to remove a stick and boot with just the one, see if it helps. If you get a good POST and the OS loads, try it again with both sticks.

SimpleLeonard · June 16, 2013

Had a look around and some folks had found that their RAM caused this type of error. You might want to remove a stick and boot with just the one, see if it helps. If you get a good POST and the OS loads, try it again with both sticks.

I tried with only one stick, but same problem. :(