Help Pls!

[SpeechlessHero]

I am a new builder, i just put together my new pc and went to turn it on and got no display, i had all fans, leds, ect all running but no display. I checked to make sure all cords were plugged in properly and they were, so i turned off the pc and retried, same thing happened. i was looking online and people were talking about changing ram or only putting in one stick ect so i changed the ram. this is where things get ugly. i put in the ram and heard the clicks of the lock so i turned it on. the system turned on for like 5 secs not even then turned off, i didnt know what to think so i checked my ram and saw that one of the sticks was only half in fml. so i pushed it all the way in and tried to turn it on and nothing will turn on not even the psu fan. So i thought maybe a short so i did the paper clip jumper and the psu is fine still runs. Did i kill my motherboard and should i get a better one cause a lot of people have reviews on it saying it was DOA.

PLS HELP ME I JUST WANNA PLAY LEAGUE D:

 

AMD Athlon X4 860K 3.7GHz Quad-Core Processor

ASRock FM2A88M-HD+ Micro ATX FM2+ Motherboard
Kingston HyperX Fury 8GB (2 x 4GB) DDR3-1866 Memory
Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive
Nvidia GeForce Gtx 660
Corsair 230T Windowed-Orange ATX Mid Tower Case
Corsair Builder 600W 80+ Bronze Certified ATX Power Supply

[Mrafki1]

Are you working in an enviroment where there is no static also did u install ur standoffs

[SpeechlessHero]

Are you working in an enviroment where there is no static also did u install ur standoffs

Yes, wood table, hard wood floor. I didnt install standoffs because before i put the motherboard in the case i checked to see if they were all ready in place and they were 

[Sack]

I am a new builder, i just put together my new pc and went to turn it on and got no display, i had all fans, leds, ect all running but no display. I checked to make sure all cords were plugged in properly and they were, so i turned off the pc and retried, same thing happened. i was looking online and people were talking about changing ram or only putting in one stick ect so i changed the ram. this is where things get ugly. i put in the ram and heard the clicks of the lock so i turned it on. the system turned on for like 5 secs not even then turned off, i didnt know what to think so i checked my ram and saw that one of the sticks was only half in fml. so i pushed it all the way in and tried to turn it on and nothing will turn on not even the psu fan. So i thought maybe a short so i did the paper clip jumper and the psu is fine still runs. Did i kill my motherboard and should i get a better one cause a lot of people have reviews on it saying it was DOA.

PLS HELP ME I JUST WANNA PLAY LEAGUE D:

 

AMD Athlon X4 860K 3.7GHz Quad-Core Processor

ASRock FM2A88M-HD+ Micro ATX FM2+ Motherboard

Kingston HyperX Fury 8GB (2 x 4GB) DDR3-1866 Memory

Western Digital Caviar Blue 1TB 3.5" 7200RPM Internal Hard Drive

Nvidia GeForce Gtx 660

Corsair 230T Windowed-Orange ATX Mid Tower Case

Corsair Builder 600W 80+ Bronze Certified ATX Power Supply

Disconnect every cable except the power, and see if it boots. No display cable, no keyboard cable etc.

[SpeechlessHero]

Disconnect every cable except the power, and see if it boots. No display cable, no keyboard cable etc.

Still nothing....damn

[Sack]

Still nothing....damn

worth a shot, it worked with my father's computer. Good luck mate.

[SpeechlessHero]

worth a shot, it worked with my father's computer. Good luck mate.

Well thanks for the help i guess next step would be new motherboard? sighs

[Sack]

Well thanks for the help i guess next step would be new motherboard? sighs

Try swapping the RAM sticks, if one dosen't work the other could. I don't really think you'd fry the board by not installing the RAM properly.

[SpeechlessHero]

Try swapping the RAM sticks, if one dosen't work the other could. I don't really think you'd fry the board by not installing the RAM properly.

I have already i will keep trying different things later thanks though

[Sack]

I have already i will keep trying different things later thanks though

Sorry to hear that, good luck.

[tinytom113]

I know they aren't fashonable but did you fit you POST speaker 1 beep is good any more and you will have to check your manual to see what's wrong. if nothing happens you may well have broken you board

[Mrafki1]

Yes, wood table, hard wood floor. I didnt install standoffs because before i put the motherboard in the case i checked to see if they were all ready in place and they were 

wait so u didnt install standoffs put the board in and powered it?

[SpeechlessHero]

I know they aren't fashonable but did you fit you POST speaker 1 beep is good any more and you will have to check your manual to see what's wrong. if nothing happens you may well have broken you board

Would I have to go out and by a post speaker? Cause if not I don't even have one

[SpeechlessHero]

wait so u didnt install standoffs put the board in and powered it?

No I didn't because the case has pre-installed ATX and micro ATX standoffs already, needless to say there wasn't a random standoff touching the back off the motherboard

[ZiggyManSaad]

Did you plug in your CPU power cable? I didn't do that once when I was moving over to a new case. Silly me.

[SpeechlessHero]

Did you plug in your CPU power cable? I didn't do that once when I was moving over to a new case. Silly me.

Yes i did.

[Mrafki1]

WAIT did u happen to take out a tiny piece of plastic from one of the headers?