h100i tube length

[baseballcod9]

Ok, so im planing a build and i need to know the length on the tubing for the h100i. The reason being that i plan to get the s340 case from nzxt and i was going to mout the radiator to the front of the case (As nzxt recommends). I just want to make sure that it will reach to the cpu socket while in the front of the case. Oh, motherboard is the Z97- ar or the gigabyte 990fxa- ud3 (Still not sure intel or amd). Thank you for any help you can provide.

[ttam]

Ok, so im planing a build and i need to know the length on the tubing for the h100i. The reason being that i plan to get the s340 case from nzxt and i was going to mout the radiator to the front of the case (As nzxt recommends). I just want to make sure that it will reach to the cpu socket while in the front of the case. Oh, motherboard is the Z97- ar or the gigabyte 990fxa- ud3 (Still not sure intel or amd). Thank you for any help you can provide.

11.5 inches

[Si3Rra_7]

I'm sure it will reach , the case is not that long

 

Will you be changing fans ?

Will you be using push-pull/push/pull ? 

[baseballcod9]

I plan on keeping the stock fans and going push i think that what it is. Whatever having the fans in front of the radiator would be. i always forget what push and pull are. I know the stock fans can be loud but im not a noise freak and if there that terrible then i will either turn down the rpm an immense amount or look into buying some sp120 quiet editions.