Phanteks Enthoo Primo WC Help

[lavdi]

SO i was going to do a WC loop in enthoo primo and i was thinking to myself which rads should i put in.

In the top definitely a 480 the only thing im not sure is bottom i heard you can do a 480 but im not sure about the drive cages since i have an HDD.

 

Now the site im going to order from is EK since i live in Slovenia.

Also sorry for bad english.

 

 

Any help is really appreciaated.

[VulsaviiK]

If you remove the second drive cage, you can still fit a 480 Monsta. I recommend checking out this article, found HERE

 

That should run you through everything you can/can't do

 

In fact, they have a 480 Monsta in that build, which looks freakin awesome IMHO

[paulstung]

You can also get a Monsta 480 up top depending on what motherboard, and ram your using. I had the MSI Z87 MPower, and Avexir core ram, and it fit in mm perfect, although it was very tight getting it past the res bracket. 

[Shaqo_Wyn]

Remove the bottom HDD cage and you're golden. I recommend putting two 480 UT60's one in the top, one in the bottom.

They fit and the temps will be insane.

[Jed]

I have a 360 Monsta in push/pull in the bottom of my Enthoo Primo. I cannot fit the drive cages in. I recommend that you use an adapter and put your HDD in the bottom optical bay. The cabling might be a little messy, but you won't see it due to the shroud.