FX 8350 Setup

[TorqueS]

Hello guys!

 

I ran into some trouble, I think, with my new build.Parts are:

-CPU : AMD FX 8350

-CPU Cooler : Corsair H80i

-MB : ASRock Fatal1ty 990FX Killer

-RAM : Kingston HyperX Fury Red 8GB(2x4GB) 1866Mhz

-PSU : SuperFlower Golden King 600W(80+ Platinum)

-GPU : AMD Radeon HD 5670 512MB GDDR5(will change it next month, it's from the previous build)

-CASE : Corsair Graphite 230T(all vent spaces are filled with 120mm fans)

-HDD : 500GB WD Caviar Green SATA-II

 

 

The problem is with  the CPU temps. It idles at 38degrees...but i disabled some settings in the BIOS, to make it run at full speed constantly.

I manually set the voltage to 1.350V, and ran an OCCT session, reaching 65 degrees after 10 mins.

I think that i can undervolt the CPU even more, but i also feel that some more settings need to be disabled, because while in OCCT, the load won't stay 100%, it will fluctuate from 97 to 99.5%.

 

Well, what I want from you guys, is a set of complete settings I need to make in the BIOS, in order to achieve a good stability.

I will provide more info if needed, but for now I could use a piece of advice, since i'm not familiar with this topic.

[Sintezza]

disable cool n quiet, and leave the voltage on auto.

 

Check if the pump of your H80i is working...

Could be something with the H80i

[TorqueS]

"disable cool n quiet, and leave the voltage on auto."

 

Will do, and see if it works.

 

"Check if the pump of your H80i is working...

Could be something with the H80i"

 

The pump is working, according to Corsair Link. I set the fans to 1800RPM, 

[B1G_WH1T3]

"disable cool n quiet, and leave the voltage on auto."

 

Will do, and see if it works.

 

"Check if the pump of your H80i is working...

Could be something with the H80i"

 

The pump is working, according to Corsair Link. I set the fans to 1800RPM, 

 

fans and pump don't work on same RPM.

 

the pump uses your cpu header's rpm settings so if you turned that down your pump will run at a lower rpm.

 

you can se ein corsair link what the pump rpm is and the fans

[TorqueS]

Here are some screenshots from HWmonitor, AIDA64, and Corsair Link.

 

 

 

Thought they might help.