Just two questions :)

[Phraxure]

Hello everyone, I have two questions and it will be awesome if anyone of you can help me out.

1. Does the enthoo primo support a 140 mm quad radiator in the bottom?

2. The primo has plugs that a phanteks led fan can be plugged into, is their a splitter so that I can out two led connectors from two phanteks fans into?

[Leonard]

Answers

1. No. 480mm radiator is the largest supported.....http://phanteks.com/Enthoo-Primo.html

2. You can use one of these and use double sided tape and stick it some where or one of these.

[Phraxure]

Hey thanks for the quick reply, but what I meant, is a y splitters for these on the top.

[Leonard]

Hey thanks for the quick reply, but what I meant, is a y splitters for these on the top.

I know what you meant and that is why i gave you two options in general but the second option which is this will work. You plug the PWM female into the PWM Phanteks male and then the male SATA connector into a SATA female of your PSU. If the fan connectors from the Phanteks case is not PWM you will not be able to use it and you will only be able to use three pin fans and not PWM which are the better choice for water cooling.

 

This is a cleaner choice of the fan adapter i already gave you but this one uses molex as the auxiliary power supply.

 

If you don't want any adapters with auxiliary power supplies then this is what you want.

 

Really nice case choice by the way.