No Boot

[EinsteinJr_]

So im doing my first boot on my new pc which uses an AIO cooler. Now I have a A620ME motherboard with an Thermalright Frozen Notte cooler and my problem was that I couldnt find the aio pump header so i plugged it into the JRGB just assuming it wouldn’t break and tried to boot again but nothing will happen. Any help is appreciated, this build has a bunch of other problems so im going one at a time! I also tested the PSU with a paperclip and it worked but the the pc still wont boot. Before I realised the AIO needed its own header it had given a heat error so i quickly turned it off and then did the aforementioned. I’m just thinking of getting a new mobo as i think its short circuited

[Hinjima]

3 minutes ago, EinsteinJr_ said:

So im doing my first boot on my new pc which uses an AIO cooler. Now I have a A620ME motherboard with an Thermalright Frozen Notte cooler and my problem was that I couldnt find the aio pump header so i plugged it into the JRGB just assuming it wouldn’t break and tried to boot again but nothing will happen. Any help is appreciated, this build has a bunch of other problems so im going one at a time! I also tested the PSU with a paperclip and it worked but the the pc still wont boot. Before I realised the AIO needed its own header it had given a heat error so i quickly turned it off and then did the aforementioned. I’m just thinking of getting a new mobo as i think its short circuited

Full spec list please.

Plugging a fan or pump into the JRGB is not good.

[EinsteinJr_]

CPU - Ryzen 5 7600X

MOBO - A620M-E Pro MSI

Cooler - Thermalright Frozen Notte

GPU - 5060TI Dual Fan INNO3D

RAM - 2X8 Crucial 

Storage - 500gb ssd netac

Case - Phanteks xt view white

psu - msi a650bn 650 w

[EinsteinJr_]

5 minutes ago, Hinjima said:

Full spec list please.

Plugging a fan or pump into the JRGB is not good.

. Reply above

[OhYou_]

your aio has two wires coming from the bit that you put over the cpu, one is the ARGB connector which has to ends, one has pins sticking out and the other doesnt.
the other should just have one end, plug that in to the SYS_Fan header
plug the fan splitter for that came with the cooler into the CPU_Fan header, and then plug the two cables coming from the radiator part of the cooler into that splitter.

your motherboard doesnt have ARGB so you wont be able to use the rgb with the JRGB it does have,