Random BSOD's Please help

Jbcole · October 17, 2024

Hello, I used to have a AMD Asrock phantom gaming 7800xt, a msi mag 750watt psu, nzxt h5 elite case, and a kraken 240 mm AIO. All the parts i mentioned were replaced with : AMD sapphire 7900xtx, Thermaltake 1050watt psu, Lian LI 011D rgb case, Lian li 360 sl inf LCD AIO, and finally 6 reverse blade lian li fans for the case. After i replaced the parts and yes i did use DDU to remove previous drivers from my old graphics card when upgrading to the new one. My first problem i had was my monitor was not working or the cable it seemed any cable that was DisplayPort to display port would not work but if it was HDMI to display port or other way around it would work just not Display port to display port. After i got frustrated i sent my build to best buy for them to find the problem and just fix it. They did but what they did was just unslot the graphics card and reseat it and it started working. i was confused but hey it works now. After bringing back my computer from best buy i tried turning it on and the fans will turn on and all the RGB but nothing will display for any of my monitors. I really did not wanna send this heavy ass computer to best buy so i just kept hard shutting it down and turning it on again. After some time it WORKED!!! i was super excited and relieved for it to be working. After a couple days i updated my BIOS and finally had the option to do xmp for my ram and have the speeds i wanted without having any issues. Then after a few days i got a blue screen. error code or stop code was DPC_WATCHDOG_VIOLATION. I thought nothing of it and i just let it restart my computer. After a few days which is now today i got one in the middle of the class with the same stop code. Then a couple hours later i got another one with a stop code of (Driver_IRQL_NOT_LESS_OR_EQUAL). Im just so confused on why I'm getting these codes and BSOD's now. Help is appreciated and i will list everything i have in my setup just in case you need that information and maybe something is not working well with the other.

Ryzen 9 7900x (Undervolted 1.15 volts and 5250 for the cores)

Sapphire Technology AMD Radeon RX 7900 XTX Nitro Plus Vapor-X RGB Overclocked Triple Fan 24GB GDDR6 PCIe 4.0 Graphics Card (over clocked Min Frequency at 2600 and max Frequency at 3000... Voltage is 1100 and the vram is Max frequency at 2714) (as well using amd software to overclock)

Thermaltake Toughpower GF A3 1050 Watt 80 Plus Gold ATX Fully modular.

Lian Li galahad II LCD-SL Infinity 360MM AIO

Team T-Force Delta White DDR5 6000MHz CL38 6000 MHz (Maximum Speed) ( i have four 16 gb sticks so 64)

MSI Pro X670-P WIFI DDR5 (bios update 9/20/2024)

I have Four monitors one mini one in the case at the back where a exhaust fan should go and 3 other 27 inch size monitors 2 of them are 1080p and one 1440p.

if you need me to get some file or event file folder or what ever let me know and how to do it im pretty new to all this stuff still im even surprised the pc is even on but yea.

My dump file : https://drive.google.com/drive/folders/1wJvQrKXtqlno--V2TcC1rcUFC4tR9wdk?usp=sharing

couldnt do perfomance monitor since it kept getting stuck at 60 seconds and nothing will happen.

OS: windows 11 home

Bjoolz · October 17, 2024

Could you check the minidump folder if all the dump files are 1KB there as well? If yes, they are all corrupted.

You mentioned two different crash errors. Is there a general mix of errors? If yes, that makes memory the main suspect. Memory doesn't have to mean RAM, but it's usually the main suspect. Windows puts low priority data from RAM into the page file and loads it back in when needed so storage can look like memory (And memory can look like storage). The memory controller is in the CPU and if this fails it will just look like memory.

When it's storage about half of the dumps will usually blame storage or storage drivers, which I don't see here, so it's likely not storage.

If anything is overclocked or undervolted, remove it. That includes the EXPO profile. The highest officially supported speed with that CPU is 5200MT/s, so run that or lower.

To test the RAM, use the machine normally with one stick at a time. If just one of the sticks cause crashes, faulty stick. If it crashes with either stick it's probably the CPU. Memory testers miss faulty RAM fairly often with DDR4 and newer so I don't trust them.

Jbcole · October 17, 2024

4 hours ago, Bjoolz said:

Could you check the minidump folder if all the dump files are 1KB there as well? If yes, they are all corrupted.

You mentioned two different crash errors. Is there a general mix of errors? If yes, that makes memory the main suspect. Memory doesn't have to mean RAM, but it's usually the main suspect. Windows puts low priority data from RAM into the page file and loads it back in when needed so storage can look like memory (And memory can look like storage). The memory controller is in the CPU and if this fails it will just look like memory.

When it's storage about half of the dumps will usually blame storage or storage drivers, which I don't see here, so it's likely not storage.

If anything is overclocked or undervolted, remove it. That includes the EXPO profile. The highest officially supported speed with that CPU is 5200MT/s, so run that or lower.

To test the RAM, use the machine normally with one stick at a time. If just one of the sticks cause crashes, faulty stick. If it crashes with either stick it's probably the CPU. Memory testers miss faulty RAM fairly often with DDR4 and newer so I don't trust them.

Will try this but I have had my ram tested before which were all fine since I thought my ram was faulty but later found out it was my motherboard not being updated in sometime so I can assure that the ram is fine but with the cpu I will lower the core speeds or wtv and see I really hope it’s not the cpu but thank you for the response.

one more thing I got mostly the DPC error more than the not equal too error I just got that one recently so but it was mostly the DPC watchdog error more.