Jump to content

Hi everyone!

I have problem like in this post 

but i notices that my CPU power plugin one wire is burned, but i change all plug, blean on motherboard, check motherboard back, there is nothing evel brown from burning, yesterday in about 22 i turned it off and all was be fine, now i turn it on and no beep on startav, everytime in normal i have one beep when turn on afte POST check, its more than 12 years old, but for my its really fine pc, i hope there i no big problem.

My pc: 

MB: GA 970A-DS3

CPU: AMD FX6200 (3.8GHz /6 core)

GPU: GeForce RTX760 2Gb (if i write correct)

RAM: 16Gb (3 planks 2x4Gb and 1x8Gb)

Power: Chieftec GPS 700A8 (700W)

HDD and else not important, and my favorit old keyboard from 2002, i clean it and change thermal paste 4 days ago and those 4 days use pc and all was just fine, can someone help me?

 

In attachmeni is how looks when burned, but i changet, check voltage and there all fine in both yellow is 12v

20230726_131939.jpg

20230726_131946.jpg

Link to comment
https://linustechtips.com/topic/1521939-problem-with-my-old-pc/
Share on other sites

Link to post
Share on other sites

7 minutes ago, leclod said:

This seems bad, something fried, either psu or motherboard. Maybe both.

I guess you did something wrong.

Your writing is difficult to understand

I am not so got in english, i check, psu is working properly, motherboard didnt see someting fried, when turn on all collers start spinning as normal, only no beep (always was one beep) and monitors didnt react, i tryed to remove hardwares, but nothing, this is normal if something critical happen to motherboard its working like that, no beeps, collers spinning, all coolers, cpu, gpu and psu?

Link to comment
https://linustechtips.com/topic/1521939-problem-with-my-old-pc/#findComment-16050049
Share on other sites

Link to post
Share on other sites

Dude you have a chieftec those are KNOWN to kill pc's and catch fire

 

STOP USING THIS RIGHT NOW!!!!!!!!!!!!!!!

 

Your psu failed spectacularly and DO NOT use it. It is for the garbage now (already was) as whatever life is left in the system every second it's being used your chances of a working computer decrease massively

 

It needs to be replace by a QUALITY UNIT. Got a budget?

Link to comment
https://linustechtips.com/topic/1521939-problem-with-my-old-pc/#findComment-16050052
Share on other sites

Link to post
Share on other sites

6 minutes ago, jaslion said:

Dude you have a chieftec those are KNOWN to kill pc's and catch fire

 

STOP USING THIS RIGHT NOW!!!!!!!!!!!!!!!

 

Your psu failed spectacularly and DO NOT use it. It is for the garbage now (already was) as whatever life is left in the system every second it's being used your chances of a working computer decrease massively

 

It needs to be replace by a QUALITY UNIT. Got a budget?

I used this psu for 10 years and all works grate, before this i was tested same power and this was melted from inside and this was be 10 years ago, this is good manufacturer, i my country use from this and all is fine

Link to comment
https://linustechtips.com/topic/1521939-problem-with-my-old-pc/#findComment-16050069
Share on other sites

Link to post
Share on other sites

Just now, Jazeks said:

I used this psu for 10 years and all works grate, before this i was tested same power and this was melted from inside and this was be 10 years ago, this is good manufacturer, i my country use from this and all is fine

It's not. You were lucky that is all.

 

Chieftec has like 3 good psu? This one is NOT one of those. This one is a pc killer.

 

It's dead rn so needs to be changed

Link to comment
https://linustechtips.com/topic/1521939-problem-with-my-old-pc/#findComment-16050073
Share on other sites

Link to post
Share on other sites

18 minutes ago, jaslion said:

It's not. You were lucky that is all.

 

Chieftec has like 3 good psu? This one is NOT one of those. This one is a pc killer.

 

It's dead rn so needs to be changed

I am not sure if psu is broken, i test it, its give needed voltages

Link to comment
https://linustechtips.com/topic/1521939-problem-with-my-old-pc/#findComment-16050111
Share on other sites

Link to post
Share on other sites

47 minutes ago, jaslion said:

The plug melted. That is dead. Either that or it fried the board.

 

Either way DO NOT trust that thing anymore

I check all again, i understand in radio electronics and i can tell you thwt all is ok, condensators is fine, visible transistors and chips is ok, almost always is something fried, its visible, even microchips, but i need to get to service tomorrow

Link to comment
https://linustechtips.com/topic/1521939-problem-with-my-old-pc/#findComment-16050229
Share on other sites

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×